Specifications
plastic table board production equipment1, servo save energy.
2, adopt Japan MOOG parison controller.
3, Robot hand
This plastic table board production equipment depend on machine electrical components , open head single ring 120L drum machine , machine for plastic jerrycan, plastic barrel making machine, inject blow moulding machine
plastic table board making machine photo
plastic table board production equipment features:
1. The screw adopts high potency melt to make sure the material well mixed.
2. Adopt frequency control of motor system to reduce the power consumption.
3. Adopt horizontal movement frame to improve stability and speed.
4. The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase life span.
5. High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
6. The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
7.Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
8. The precise time control system assured good quality, suitable weight and reduces production cycle.
9. Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.
10. Multi-function bottom blowing type for shaped products.
11. The mechanical arm can take out the product automatically.
plastic table board production equipment parameter
extruder |
| ||
Screw diameter | 120mm | ||
L/D ratio | 25:1 | ||
Screw speed | 10~60r.p.m. | ||
Drive motor | 75Kw SIEMENS BEIDE | ||
DC drive motor controller | Eurotherm UK | ||
Heating zone with cooling fan | 5 zone | ||
Output/Capacity | 180Kg/hr ( HDPE particle) | ||
Heating capacity | 5X6.5 (=32) kw | ||
Vertical adjustment of head | 500mm | ||
Forward/Backward adjustment of head | 600mm | ||
Groove feed barrel cylinder | Have IKV | ||
Gear box | Hard gear decelerator | ||
Ladder and safety rails | Have | ||
| |||
Accumulator Head |
| ||
Accumulator capacity | 30L(23kgHDPE) | ||
Design | First in and first out | ||
Heating zone | 5 zone | ||
Heating capacity | 40 kw | ||
Max die&pin diameter | 600mm | ||
Die head axis with pre-blow | Ø100mm | ||
Accumulator push-out stroke measurement | Transducer Italy Gefran | ||
Injection pressure | 12 Mpa | ||
Extruder stop | If material up to level or full, extruder stop | ||
| |||
CLAMPING UNIT |
| ||
Tie bar | Two tie bar | ||
Platen size (Effective measurement ) | 1400(W)X1600(H) | ||
Clamping force | 960KN | ||
Close/Open stroke | 600-1400mm | ||
Mold weight | 5000kg (max) | ||
Clamping stroke measurement | Transducer Italy GEFRAN | ||
Hydraulic valve | Taiwan YUKEN | ||
Number of hydraulic cylinder | 1 | ||
High pressure | 14 Mpa | ||
Support parts for platen movement | Liner Guide | ||
|
Product which made by this plastic table board production equipment
plastic table board production equipment die head
plastic table board production equipment clamping system
plastic table board making machine screw
plastic table board production equipment electric parts
plastic table blow moulding machine for drums spare parts.
plastic table board production equipment component brand
Any inuqiry about plastic table board production equipment , plastic barrel making machine , please contact us! Thanks!