This is Oil cans blow moulding machine, 30l plastic blow moulding machine , machine for making plastic jerrycans/barrel
Extrusion blow molding machne features:
1. The screw adopts high potency melt to make sure the material well mixed.
2. Adopt frequency control of motor system to reduce the power consumption.
3. Adopt horizontal movement frame to improve stability and speed.
4. The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase life span.
5. High stench guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
6. The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
7.Advanced design to eliminate the melt material degrade in the runner, to avoid the perform draw-down and the welding line.
8. The precise time control system assured good quality, suitable weight and reduces production cycle.
9. Freely to move the extrusion foundation backward or forward to make the exchange of the mold easy.
10. Multi-function bottom blowing type for shaped products.
11. The mechanical arm can take out the product automatically.
blow molding machine jerry can parameter
Item | Code item | Parameter | Note |
Extruder (Main extruder ) | Max capacity | 60L |
|
Main screw | Ø90mm | High efficiency mixing | |
Screw L/D | 24 |
| |
Screw material |
| 38CrMoALA | |
Max.Extruder consumption | 130-160KG/hr |
| |
Twisting transition method | Electrical machinery,Gear box,DC motor | Hard gear surface decelerator with DC regulator | |
Driving motor | 45KW |
| |
Screw rotate speed | 5-60r/min |
| |
Ahead/back adjusting | Yes |
| |
Up/ down adjusting | Yes |
| |
Temperature control zone | 4 |
| |
Heating power | 15kw |
| |
Cooling for blower | 4 |
| |
Cooling function | Yes | Cooling water | |
Clamping unit (Mold openiing/closing unit) | Structure |
| With three bar timing clamping structure in high speed and high force,to achieve quality products |
Clamping directions | Linear guide | For high precise location for longer service life | |
Platen dimension | 980*950mm | (W*H) | |
Max.mold dimension | 720*1000mm | (W*H) | |
Platen distance | 450-1050mm | Min.-Max. | |
Clamping force | 300KN |
| |
Mold thickness | 460-600mm |
| |
Fixing pattern of mold | Mold press platen |
| |
Mold open/close stroke control | Inducing Switch +moving | Discriminate mold opening/closing end,mold opening/closing slow speed | |
Light Electric Safety protect |
| Taiwan | |
Die head | Form | Accumulator | First in ,First out |
Material |
| 38CrMoALA,inner mirror treatment | |
Accumulator volume | 6.6L |
| |
Output of injecting | 4.95kg | HDPE,5502 | |
Max die-pin diameter | 350mm |
| |
Heating Method |
| Stainless steel heating ring,precision +1% | |
Temperature control zone | 4 |
| |
Blow-air | Yes |
| |
Adjusting of parison thickness | Yes | MOOG 30 point | |
Adjusting method of thickness | Inner mold adjusting+5mm |
|
Machine photos
Product which made by blow molding machine
Plastic extrusion blow molding machine for tool box die head
Tool box blow moulding machine clamping system
Plastic blow moulding machine for plastic tool box screw.
extrusion blowing machine electric parts.
extrusion blowing machine for jerry cans spare parts.
extrusion blowing machine for jerry cans component brand
Any inuqiry about Machine for making HDPE blow moulding machine, Tool box extrusion blow molding machine, blow moulding machine for tool box , please contact us!