Specifications
FeaturesSY100E Hydraulic Slotting Machine
Being designed for cutting various planes, formed surface and key way of workpiece,
Technical Data
Desription | SY100E |
|
Max.stroke length cf ran | 1000 | mm |
Mix.stroke length cf ran | 125 | mm |
Max.slotting length | 1000 | mm |
Distance cf vertical adjest of ram | 1090 | mm |
Extreme high speed for work stroke cf ram | 22 | m/min |
Extreme low speed for work stroke cf ram | 5 | m/min |
Speed ratio cf work stroke and return stroke cf ram | 1:1.45 |
|
Speed adjust for work stroke | (Stepless) |
|
Max.slotting force |
| KN |
Distance from tool holding surface to column front | 1151 | mm |
Distance from worktable surface to underside of slide rack | 1250 | mm |
Max.longitudinal travel of worktable | 1400 | mm |
Max.transeverse travel of worktable | 1100 | mm |
Diameter of worktable | φ1400 | mm |
Inclination of ram | 0-10 | . |
Range of vertical feed (stepless) | 0~1.5 | mm |
Range of horizontal feed (stepless) | 0~3 | mm |
Range of rotary feed (stepless) | 0°~1°15′ | . |
Max loading weight on worktable | 4000 | kg |
T-slot width in the center of worktable | 28H8 |
|
Power and rotaing sreed of main motor | 11kw,960r/min |
|
Power and rotaing sreed of motor for rapid mover of table | 1.5kw,960r/min |
|
Type of motor for cooling pump | DB-12B 40W 380W |
|
Net weight(approx) | 15500 | kg |
Dimensions cf machine tool (Lenght×Wight×High) | 4125×2755×4888 | mm |
Working Accuracy
Flatness of machined surface on tested workpiece | 0.015 | mm |
Verticality of machined surface on tested workpiece | 0.025 | mm |
Surface roughness on tested workpiece | 6.3 | mm |
Verticality of machined side surface on tested workpiece against base | 0.02 | mm |
