stainless steel pipe fittings
| Specification | Type | Data |
| Size | 90 degree Long/Short Radius 45 degree Long Radius | Seamless 1/2”-20”(DN15-DN500) Welded 1/2”-48” (DN15-DN1200) |
| 180 degree Return Band | Seamless 1/2”-4”(DN15-DN100) | |
| Wall Thickness | 90 degree Long/Short Radius 45 degree Long Radius | SCH5S-SCH160 |
| 180 degree Return Band | SCH5S-SCH80S | |
| Material | 304, 304L, 321, 316, 316L, etc. | |
| Standard | GB/T12459, GB/T13401, SH3408, SH3409, HG/T21635 | |
| HG/T21631, ASME B16.9, MSS SP-43, DIN 2605, JIS B2313 | ||
| Butt-welding Elbows ANSI B16.9 | ||||
Nominal Diameter | Outside Diameter/mm | Center to End/mm | ||
| 45 degree Elbow | 90 degree Elbow | |||
| DN | OD | Long Radius | Long Radius | Short Radius |
| 1/2 | 21.3 | 15.7 | 38.1 | - |
| 3/4 | 26.7 | 19.1 | 38.1 | - |
| 1 | 33.4 | 22.4 | 38.1 | 25.4 |
| 1 1/4 | 42.2 | 25.4 | 47.8 | 31.8 |
| 1 1/2 | 48.3 | 28.4 | 57.2 | 38.1 |
| 2 | 60.3 | 35.1 | 76.2 | 50.8 |
| 2 1/2 | 73 | 44.5 | 95.3 | 63.5 |
| 3 | 88.9 | 50.8 | 114.3 | 76.2 |
| 3 1/2 | 101.6 | 57.2 | 133.4 | 88.9 |
| 4 | 114.3 | 63.5 | 152.4 | 101.6 |
| 5 | 141.3 | 79.2 | 190.5 | 127 |
| 5 | 168.3 | 95.3 | 228.6 | 152.4 |
| 8 | 219.1 | 127 | 304.8 | 203.2 |
| 10 | 273.1 | 158.8 | 381 | 254 |
| 12 | 323.9 | 190.5 | 457 | |
Specifications
Stainless Steel Elbow with 90 deg Casting, Available in 1/8 to 4-inch Sizes
Model Number: elbow-SS304-BSP-1
Sizes: 1/8 to 4
stainless steel elbow
Stainless Steel Pipe Fitting | |
Stainless Steel Elbow
| |
Standard | ASME SA403,BS16.9,GB12459,EN,DIN,JIS |
Material | 304,304L,310S,309S,316,316L,317,317L,321201, 202, etc. |
Sizes | 1/2'~50'(DN10~DN1200) |
Wall Thickness | Sch5X~SchXXS |
Bend Degree | 45°,90°,180° |
Type | Elbow, reducer, cross, pipe holder, manhole cover, stub,clamp,union ,valve etc |
Steel Flange
| |
Standards | ASTMA182,ANSI B16.9, ANSI B16.28, EN10253-2, EN1092-1,JIS B2313,DIN2605, |
Stainless Steel | 304, 304L, 310S, 309S, 316, 316L, 317, 317L, 321, 201,etc. |
Carton Steel | ST35, RST37, S235JR, Q235, SS400 |
Sizes | 1/2" to 60" (DN8 to DN1500) |
Pressure Class | 150LB, 300LB, 400LB, 600LB, 900LB,1500LB, etc. |
Type | Plate type Flat Welding Flange,Slip on Neck Flange,Welding Neck Flange, Blind Flange,Socket Welding Flange,Thread Flange,Screwed Flange,Lap Joint |
Stainless Steel Reducer
| |
Standard | DIN 2527,2573,2576,2642,2633,JIS B2311,ASME 16.9 |
Material | 304, 304L, 310S, 309S, 316, 316L, 317, 317L, 321201, 202, |
Technique | Forged |
Size | DN15~DN1200 (1/2'~48') |
Thickness | SCH5~XXS |
Product photos
Contact with us