1000m Remote control dog training collar with NO BARK dual function
pet product of dog training collar training distance:1000m
pet product of dog training collar FUNCTION: Remote control AND NO BARK dual function
pet product of dog training collar include: 1 controller; 1or 2 receivers; batteries; antenna; indicator light
1,controller
pet product of dog training collar controller with LED light: YES
pet product of dog training collar controller button: electroshock button; ON and OFF button; tone button
pet product of dog training collar controller batteries: Yes
2, receiver
pet product of dog training collar receiver:1 or 2 for option
pet product of dog training collar receiver batteries: yes, 3 threeA batteries(1.5v)
pet product of dog training collar receiver with LED light: yes
pet product of dog training collar COLLOR: RED AND BLACK(FOR OPTION OR BOTH)
pet product of dog training collar receiver WATERPROOF: YES
Preparation before using:
1 Make sure that batteries are installed in the remote controller. Press the “ON/OFF” button for about two seconds, the two LED lights will light. Press the button again can turn off the power.
2 The remote controller has a power-saving feature, when you don’t operate it in a long time, the power will be turned off automatically. You should turn on the power to be re-used.
3 When the remote controller is in a standby state, press the button shortly can choose the LED light. The A/B LED light stands for two different receivers.( when the remote controller just control one receiver, you don’t need to choose it.)
4 Checking the remote controller: Press the buttons on the remote controller one by one and the indicator light will light. If the indicator light doesn’t light or goes dim, change the batteries.
5 The receiver uses three AAA 1.5V (or AAA 1.2V rechargeable) batteries, power indicator light will flash when the power is low.
6 Take off the waterproof pouches before installing the batteries into the receiver, then open the battery cover and install three batteries (please pay attention to the positive and negative electrode direction of the batteries), cover the battery cover. Press the power button for about two seconds, the power indicator light will light, it means that the power is turned on. Please make sure having set the waterproof pouches before put the collar round the neck of the pet.
7 Checking the receiver: Respectively press the TONE BUTTON and ELECTROSHOCK BUTTON on the remote controller and the receiver will release corresponding sound or shock.
8 When testing the ELECTROSHOCK BUTTON function of the receiver, you will hear a “pa-pa” sound from the receiver. When the testing bulb is connected with the poles, it will light. The stronger of the shock, the faster of the flashing.
9 The ELECTROSHOCK BUTTON of the collar is to curb the improper deeds of the pet. After each successful check, you should let the pet know what should be done and what should not be done. After a number of trainings the pet will understand what you like and don’t like.
10 Adjust the length of the collar to fit the neck of the pet. The proper tightness should be that you can insert a finger in between.
11 Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training.
Operational instructions:
1 Open the insert buckle of the collar and put the collar round the neck of the pet. Adjust the tightness of collar that you can insert a finger in between.
2 Most pets feel uncomfortable at first wearing the collar. Don’t use the ELECTROSHOCK BUTTON function at that time until you are sure that the pet has gotten used to the collar. The ELECTROSHOCK BUTTON is used to curb the improper deeds of the pet. Don’t use it casually or to make fun of the pet.
3 You can call your dog by press “TONE BUTTON” in a long distance.
4 Open the NO BARK function: when the power indicator light is light, press the power switch shortly, the BARK indicator light will light, with the NO BARK function opened. You can adjust the degree of the BARK(L,M,H) by repeating it. L BARK means that even lower barking can trigger bark warning, and H BARK will be triggered by higher bark. It is recommended to use M BARK, you can adjust to L or H depending on the usage.
5 Turn on and turn off the NO BARK function by the remote controller: when the receiver indicator light is light, press the buttons (ELECTROSHOCK BUTTON FOR 3 TIMES)( ELECTROSHOCK BUTTON FOR 3 TIMES)at the second line of the remote controller at the same time, the NO BARK function of the receiver will be turned on( NO BARK indicator light will light). It will be turned off by pressing the buttons at the the third line( ELECTROSHOCK BUTTON FOR 2 TIMES)(ELECTROSHOCK BUTTON FOR 2 TIMES)of the remote controller(NO BARK indicator light doesn’t light)
6 When the dog’s barking exceeds the degree you set(L,M,H), the receiver will make a warning sound. If the barking continues, it will send gradually enhanced SHOCK
7 For preventing over use the NO BARK function, the receiver can send gradually enhanced SHOCK continuously at most four times. If the NO BARK function is triggered over four times, it will pause for two minutes. ( in this case, the BARK indicator light will flash continuously)
8 If you don’t use this product, take out the batteries of the remote controller and the receiver, so as to prolong the lifetime of the batteries.
Cautions:
1. At first wearing this collar, some pets will feel uneasy. Give the pet some time to get used to it. Don’t use the ELECTROSHOCK BUTTON of this product until you are sure that the pet has gotten used to it.
2. Digital audio transmitting technology is applied in the remote controller. Remote control signals can penetrate obstacles. It is unnecessary for the remote controller to point directly at the receiver. However, obstacles will affect the valid distance of remote controlling.
3. The valid distance of remote controlling means the straight-line distance between the remote controller and the receiver without obstacles in between. If there are interference signals or signal screening around, the actual remote control distance may be shorten.
4 The product is used for training the pets. You should be patient when training the pets. Good effect can only be achieved by lasting use of it.
5 The ELECTROSHOCK BUTTON of the receiver is used to curb the improper deeds of the pets. Please be advised that don’t use the high frequency vibration to make fun of the pet.
6 Presently, this product is the most humane tool for pet training. Following the correct operational instructions, you can effectively train the pet and bring it no harm.
7 Though the receiver is waterproof, you cannot immerse it into the water for a long time.
Picture:
