2100mm type 20tons/day liner/duplex paper production line
Technical parameter:
1.Raw material: waste paper;finished wood pulp board
2.Output paper: test liner paper;corrugated medium paper
3.Net paper width:2200mm
4.Mesh width: 2450mm
5.Output paper weight:80-250g/m2
6.Capacity: 20T/D
7.Working speed:30-80 m/min
8.Designing speed:120m/min
9.Rail gauge: 2900mm
10.Drive way: Alternating current frequency converter speed control, sectional drive.
Main structure for paper making machine
1.Cylinder mold part: 3 sets of stainless-steel plate cylinder mold ; 3 sets of equipped with couch roll,coated by rubber,equipped with 1 set of reverse roll.
2.Press part : (There are two press sections. Each section include one set top natural marble stone roll and one set bottom rubber roll.)Top roll: natural marble stone rolls 2 sets; Bottom roll :rubber roll 2sets,coated by rubber.Equipped with pneumatic pressure device.
3.Dryer part:alloy dryer can 10 sets; equipped with scraper blade 10 sets,equipped with dry felt device,semi-closed dryer cans exhaust hood 1 group.
4.Calendering part: calendering roll 2 sets,.
5.Winding part: 2100mm type horizontal pneumatic winding machine 1 set.
6.Rewinding part: 2100mm type frame-type rewinding machine 1 set.
Main equipment list for paper production line
No. | Item & Description |
1 | Stainless steel cylinder mold |
2 | Alloy dyer cylinder |
3 | Exhaust hood of dryer cylinder |
4 | Axial-flow ventilator |
5 | roots vacuum pump |
6 | Suction box |
7 | Frequency conversion controlling cabinet |
8 | 2100mm type Calender(with pneumatic pressure device) |
9 | 2100mm type Horizontal pneumatic winding machine |
10 | Frame-type rewinding machine |
11 | 2T boiler (burning gas) |
12 | 8 meters conveyor |
13 | Hydra-pulper |
14 | single effect fiber separator |
15 | Decker thickener |
16 | 35 m3 bleacher |
17 | Medium consistency sand remover |
18 | Vibrating screen |
19 | Double-disc pulp refiner |
20 | Impeller |
21 | Pressure screen |
22 | 606 sand remover |
23 | Pulp pump |
24 | Electric operation cabinet |
- Technical Consultation
- Assess Feasibility On-site
- Detailed Design of Machine and Factory or Workshop
- High Durability Equipment and Low Maintenance Cost
- Continuous Process (Less Labour Required)
- Good in-sale service and after-sale service
- Supplying Spare Part for Long Time
- Installing and Testing the Whole Production Line
- Training Engineers and Workers(operate and maintain machine)
- Power Consumption Low