Delivery Time:3-5 days
Certification:CE,FCC,MSDS
PE Jacket CCA Conductor Signal Coaxial Cable / Network CATV Coax Cable
Quick Detail:
QR320 Trunk Coaxial Cable 0.071 Inches /1.80mm CCA 0.294 Inches /7.47mm FPE 0.320 Inches /8.13mm Aluminum Tube 0.395 Inches /10.03mm PE 500M, 1000M, Wooden Drum, Pallet MOQ:5KMDescription:
KT0200 QR320 Trunk Coaxial Cable,1.8mmCCA Conductor,10.03mm PE,Messenger
has the highest reliability and flexibility of any Trunk and Distribution coaxial cable, low RF attenuation and an unprecedented 10 year warranty.All QR ans PS cable products offer tough polyethylene jackets and a standardized, environmentally sealed connector interface engineered for reliability and craft friendliness.
QR and PS cable offers lower attenuation than larger traditional products, with unmatched flexibility,
reliability and cost effectiveness. QR and PS cable is optimized for use in broadband feeder plants. It can also be used for very low attenuation antenna/headend connections.
Standard QR and PS cable Construction is comprised of:
Aluminum Strip – formed and continuously RF welded around a high compression microcellular foam dielectric core, minimizing RF egress and ingress and the rigidity common in traditional coaxial products.
Shield – fully bonded to the dielectric core, as is the copper clad aluminum center conductor.
Polyethylene Jacket – applied standard, which enhances cable reliability and allows QR and PS cable\'s unique connector technology to form an environmental seal.
Applications:
Trunk coaxial cables are connected to the optical node and form a coaxial backbone to which smaller distribution cables connect.Trunk cables also carry AC power which is added to the cable line at usually either 60V or 90V by a power supply and a power inserter.
|
KT0200 QR320 Signal Coaxial Cable,1.80mmCCA,10.03mm Flame Retardant PE, Messenger |
||
| Construction Parameters: | ||
| Inner Conductor | 0.071Inches /1.80mm | Copper Clad Aluminum |
| Dielectric | 0.294Inches /7.47mm | Foamed PE |
| First Shield | 0.320Inches /8.13mm | Welding Smooth Aluminum Tube |
| Shield Thickness | 0.013Inches /0.34mm | |
| Jacket | 0.395Inches /10.03mm | PE/ Flame Retardant PE |
| Jacket Thickness | 0.0375Inches /0.95mm | |
| Messenger | 0.109Inches /2.77mm Steel or 0.083Inches /2.11mm Steel | |
| Electrical Characteristics: | ||
| Capacitance(pF/m) | 50 ± 3 | |
| Impedance(ohm) | 75 ± 2 | |
| Velocity of Propagation (%) | 87 | |
| Inner Conductor DC Resistance(Ω/km) | 10.76 | |
| Outer Conductor DC Resistance(Ω/km) | 3.25 | |
| Loop DC Resistance(Ω/km) | 14.01 | |
| Mechanical Characteristics: | ||
| Min.Bend Radius(mm) | 50.8 | |
| Max.Pulling Tension(kgf) | 54.5 | |
| Max.Breaking Strength of Messenger(.109)(kgf) | 816 | |
| Max.Breaking Strength of Messenger(.083)(kgf) | 453 | |
| Attenuation(20℃): | ||
| Frequency (MHZ) | Nominal (dB/100m) | Max Attenuation (dB/100m) |
| 5.00 | 0.76 | 0.79 |
| 55.00 | 2.67 | 2.76 |
| 83.00 | 3.41 | 3.51 |
| 211.00 | 5.51 | 5.68 |
| 250.00 | 5.92 | 6.10 |
| 300.00 | 6.49 | 6.69 |
| 350.00 | 7.16 | 7.38 |
| 400.00 | 7.57 | 7.81 |
| 450.00 | 8.02 | 8.27 |
| 500.00 | 8.66 | 8.92 |
| 550.00 | 9.07 | 9.35 |
| 600.00 | 9.48 | 9.78 |
| 750.00 | 10.63 | 10.96 |
| 865.00 | 11.52 | 11.88 |
| 1000.00 | 12.38 | 12.76 |
