MP526 Lab Conductivity DO Meter
Specification
Conductivity | Measuring range | Conductivity:(0.00~20.00)μS/cm (20.0~200.0)μS/cm |
| (200~2000)μS/cm (2.00~20.00)mS/cm | |
| (20.0~200.0)mS/cm (200~2000)mS/cm (K=10) | |
| Resistivity:(0 ~ 100)MΩ·cm | |
| TDS: (0 ~ 100)g/L | |
| Salinity: (0 ~ 100)ppt | |
Resolution | 0.01/0.1/1μS/cm 0.01/0.1/1 mS/cm | |
Accuracy | Meter:±0.5% FS,connect meter with electrode:±0.80% FS | |
Temp. compensation range | (0 ~ 50)℃(automatic ) | |
Electrode constant | 0.1 / 0.5 / 1 / 5 / 10 / 50 / 100 cm-1 | |
Reference temperature | 25℃,20℃ and 18℃ | |
Dissolved Oxygen | Measuring range | (0 ~ 40.00)mg/L(ppm) (0 ~ 200.0)% |
Resolution | 0.1/0.01 mg/L(ppm) 1/0.1 % | |
Accuracy | Meter:±0.10 mg/L,connect meter with electrode:±0.40 mg/L | |
Response time | ≤30 s(25℃, 90% response) | |
Residual current | ≤0.1 mg/L | |
Temp. compensation range | (0 ~ 45)℃(automatic) | |
Salinity compensation range | (0 ~ 45)ppt(automatic) | |
Air pressure compensation | (80 ~ 105)kPa(automatic) | |
Automatic calibration | Air saturated by water; water saturated by air | |
Electrode type | Polarogram type | |
Temperature | Measuring range | -10℃~ 110℃ |
Resolution | 0.1℃ | |
Accuracy | 5~ 60℃range:±0.4℃ other range:±0.8℃ | |
Other Technical Parameters: | Data storage | 300 groups |
Storage content | Measuring value series number, measuring value, temperature, ATC or MTC state, measuring date and time | |
| DC9V/300mA | |
Power | RS232 | |
Communication connector | 160 × 190 × 70mm/880g | |
Size and weight | ISO9001:2008, CE and CMC | |
Quality and safety certification |
| |
Working Condition | Environment temperature | 5 ~ 35 ℃(0.01grade) 15 ~ 30 ℃(0.001grade) |
Environmental humidity | ≤75% | |
IP rating | IP54 Dustproof and waterproof |
Standard Kit Includes
1. Model MP526 Conductivity/DO Meter | 1set |
2. Model 602 Flexible Electrode Holder | 1pc |
3. Model 901 Intelligent Stirrer | 1set |
4. 2401-M Conductivity Electrode | 1pc |
5. DO500 DO Electrode | 1pc |
6. 1413μS/cm Conductivity Standard Solution (50mL) | 2btls |
7. 9V Power Adapter (Meter Use) | 1pc |
8. 6V Power Adapter (Stirrer Use) | 1pc |
9. DO503 Membrane Cap (Be used for DO electrode) | 3pc |
10. DO502 DO Electrode Inner Solution (30mL) | 1btl |
11. Cathode Polish Paper | 20pc |
12. B628 Stirring Bead | 3pcs |
13. AA Battery | 4pcs |
14. RS232 Communication Cable | 1pc |
15. MP526 Communication Software CD | 1pc |
16. Operation Manual | 1unit |
17. Brief Operation Instruction | 1unit |
18. Packing List | 1unit |
Introduction
- Meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
- There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
- Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series and China series.
- Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μS/cm ~ 200mS/cm by using only one-point calibration.
- Ability to switch among conductivity, TDS, salinity and resistivity. Multinomial calculation for TDS and salinity to ensure the conversion precision of the full scale.
- Conductivity measurement mode has the function of non-linear temperature compensation for high purity water.
- Equips new type of DO electrode which has function of automatic temperature compensation and automatic salinity compensation as well as automatic air pressure compensation inside meter to make DO measuring mode has temperature, air pressure and salinity automatic compensation, easy to use, accurate to measure.
- Polarogram type DO electrode has special electrode calibration cap. Only needs 3 to 5 minutes for electrode polarization. Electrode adopts combination diaphragm cap which very convenient to use. Each DO electrode equips with three spare diaphragms caps.
- Meter has the only product serial number.
- Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
1. As one part of Chincan Sales Group, each factory has technical support staffs available offering repair and maintenance of the products exported by Chincan.
2. We promise that all of our products will be easily accessible to technical support and manufacturer's representatives who are always ready and able to assist when needed.
Established in 2004, Hangzhou Chincan Trading Co., Ltd. is a foreign trading company authorized by Chinese State Department of Foreign Economy & Trade and General Administration of Chinese Customs, which located in Hangzhou city, Zhejiang province, China.
We are a specialist company committed to exporting laboratory instruments, educational apparatus, medical & hospital equipments. With its superior performance, Chincan instruments are sold well throughout the Americas, Asia Pacific, the Middle East, Africa and Europe. With our excellent service, Chincan Trading has won a good reputation from the market.
Cooperative factories which qualified by Chincan come from many provinces and cities across China. All of them need to be ISO certified, Some products have CE.
Our Website: www.ur-brand.net www.ur-brand.net www.ur-brand.net www.chincantrade.com
Q: Can you do OEM service ?
A: We can provide the specific products needed around the world at significantly lower costs.
CHINCAN also offers a Private Labeling Program to provide high quality lab supplies at lower prices.
If you need further information regarding our OEM or Private Label programs, please contact us freely.
Q: How long is your delivery time?
A: Usually, delivery time is 10-15 days depend on the order quantity & inventory.
Q: How about your quality warranty ?
A: Normally all CHINCAN products are supplied with a warranty of 12 Months from the date of shipment.
Q: What is your terms of payment ?
A: Payment 100% T/T, Western Union, L/C ect. in advance ,before shippment.
If you have another question, pls feel free to contact us as below: