Specifications
Breakout bootShrink ratio 2:1
Longitudinal shrink less than 20%
Waterproof Shield, protect & insulate
semicoduction
Y1-MVB medium Voltage semiconductor red Cable Break-out Boots
Voltage Class 24-36kV Ideal for insulation and protection of cable break-out
Molded heat shrinkable cable break out boots, commonly used for insulation, protection and seal against water and corrosion for cable breakouts.
Applications
Energy supply infrastructure, chemical factory, oil refinery, metallurgy, harbor or other location where safety and reliability of energy supply is vital for daily operation
Features/Benefits
Semiconductor product
Radial shrinkage ≥ 50%
Longitudinal shrinkage < 20%
Waterproof(red sealed adhesive)
Long Life Expectancy of 20 Years at -55 ~ 105 oC
Anti tracking product
Temperature Range
Operating Temperature : -55 ~ 105 oC
Shrink Temperature : 120 ~ 140 oC
Colour:red
Product Code Cross References
RAYCHEM : CCBA
Technical Details
Test item | Test standard | Typical Data |
Density | ASTM D2671 | 1.1~1.2 |
Thermal endurance | IEC 216 | -55~105 |
Tensile strength | ASTM D2671 | >12MPA |
Ultimate Elongation | ASTM D2671 | >400% |
Accelerated Ageing 168hrs at 136 Tensile strength Ultimate Elongation | ASTM D2671 | >10MPA >300% |
Low temperature flexibility 4hrs at -40 | ASTM D2671 | No cracking |
Heat shock 4hrs at 200 | ASTM D2671 | No drop no flow |
Volume resistivity | ASTM D2671 | >104Ω.cm |
Water absorption | ASTM D570 | <0.5% |
Product Selection
Product Code | Big end (mm) | Finger (mm) | Size for conductor (mm2) | ||
Before shrink | After shrink | Before shrink | After shrink | ||
Y1-3/0b | 50 | 26 | 25 | 6.9 | 10-16 |
Y1-3/1b | 75 | 38 | 32 | 10 | 25-50 |
Y1-3/2b | 86 | 48 | 40 | 14 | 70-120 |
Y1-3/3b | 112 | 59 | 50 | 18 | 150-240 |
Ordering
When ordering this product, please specify 1) Product code 2) Colour 3) Quantity Required
