Light Style Auto Welding Carriage With Clutch Switchar
1.carriage body:It is the carrier of drive unit, including motor, planet reducer and driving wheel.Control panel: It can adjust all actions of carriage. Please refer to “explanation of control panel”. |
2.hand grips:Please hold this hand grip when you carry the machine |
3.road wheel |
4.Magnet clutch handle: when the handle is in the middle and up, the magnetic is off; when the handle is rotated to parallel whit the center line of the two drivers, the magnetic is on. |
5.Fine-tuning device of torch: It is easily to use it to align the torch to weld. |
6. X-Y moving slide:Use it to adjust the position of torch. In the process of welding, you can tune the torch up and down. |
7. Guide wheel assembly: It rolls along the base metal surface and align the torch to the welding part. |
8. Insulation baffle boards |
9. Welding torch gripper: It is used to fix the torch. You can take down torch by it, when you want to repair or adjust the torch. |
10. Cable bracket: It can hold the cable on tail and power cable. |
Main technical parameter | ||
1. size | 290×230×335 mm | |
2. weight | 8.8 Kg | |
3. Power supply | AC220V / DC24V | |
4. Power | 22W | |
5. power | 10~25Kg | |
6. Range of adjusting welding torch | 50~900mm/min | |
7. Range of adjusting welding torch | Up and down | 50mm |
left-right | 50mm | |
Range of working angle | ±45° | |
Swing angle | 10° | |
Range of working angle | 360° | |
Welding parameter | ||||
Welding wire diameter Welding parameter |
Φ1.2mm |
Φ1.4mm |
Φ1.6mm | |
Current(A) | Down hand welding | 120-300 | 150-380 | 180-430 |
Flush fillet welding | 120-280 | 150-320 | 180-380 | |
Horizontal welding | 120-280 | 150-300 | 180-330 | |
Voltage(U) | U=14+0.051 300A under U=0.041+16±1.50 above 300A U=0.041+20±2.0 | |||
Distance between nozzle and Workpiece(H) | Below 200A: H=10~15mm 200~350A H=15~20mm 350~500A H=20~25mm | |||
Welding extension length(L) | The length is about 10 times welding wire diameter. It is L=10d | |||
Contents of package | |||
1. Body | 1set | 5. Fuse 3A | 3sets |
2. Regulated power supply DC24V | 1set | Certificate of qualification | 1set |
3. Standard power cord 20m | 1set | Specification sheets (M3,M4,M5,M6) | 1set |
4. 2Pcontrol wire of blowtorch 500mm | 1set | ||