4ch Standalone Telephone Recorder with Touch screen, in SD or HDD. Support RS232 TCP/IP PABX, SMDR Data, Network Control.
Channel | 4,8 |
Storage | HDD or SD card (Max.SD 64G or 2.5’ HDD500GB) |
LCD | 5”TFT800 *480 Touch Screen |
Recording Format | ADPCM |
Compression Ratio | 4KB/S |
Recording Trigger Mode | Voltage/ Voice/ Hot key |
Off hook detect voltage | 3-80V |
On hook detect voltage | 10-100V |
Support CID | DTMF/FSK |
CID detect intensity range | 0 dB to –32dB |
Recording Frequency range | 100 Hz to 3400 Hz |
Input impedance | AC: 100K,DC:5.1M |
S/N ratio | >60 dB |
Signal-to-crosstalk ratio | >70 dB |
Input voltage | DC19V |
Rating operating current | 1.5A |
Maximum current | 3A |
Rating power consumption | 30W |
Operating Temperature | 0℃ to 40℃ |
Operating Humidity | 10% to 90 % |
Network interface | RJ-45 |
Accessory | RJ11 cord,RS232 cable, power adaptor, CD |
Dimension L*W*H | 25.2cm*17.6cm*4.6cm |
NAR4000Features
- System boots in 20 sec
- Support high capacity SATA HDD 500G/1T/2T
- Optional SD card model, max 64GB
- Expandable from 8 to 16, 24 and 32 channels
- Touch screen operation
- Optional model without touch screen (SD/HDD)
- Remote control by network
- Instant playback through speNAR5000er
- Full embedded device, no PC required
- Lower power dissipation supports 7x24x365 running
NAR4000 HDD Recording Hour /SD Recording Hour
- 1. 500GB 36,000 Hour
- 2. 1000GB(1T) 72000 Hour
- 3. 2000GB(2T) 144000 Hour
- 4. 8GB 560 Hour(SD Card)
- 5. 32GB 2240 Hour(SD Card)
- 6. 64GB 4480 Hour(SD Card)
Program System Requirement
1. Windows7/Vista/XP/2000
2. Pentium 400MHZ CPU
3. 256MB RAM
4. 1GB HDD
5. Network RJ45 port
6. Audio output (Play & Monitor)
PABX SMDR
There are 2 methods to gain the SMDR data from PABX
1. RS232
2. TCP/IP
User needs to analyze original data of PABX channel number, extension number from followed main parameters and input them to program setting.
Outbound call
1. Call symbol: The mark to distinguish the call type (Outbound/Inbound call) in character string. Most PABX show “TO “ to indicate outbound call.
2. Extension position: User have to count the extension number starting position in character strings.
3. Extension number length: Extension number length.
4. PABX channel number position: User has to count the channel number starting position in character strings.
5. Channel number length: PABX channel number length.
From followed example, user can read out outbound call information
- Call symbol: $TO
- Extension position: 14th
- Extension number length: 2.
- PABX channel position: 24th
- Channel number length: 2
PABX SMDR Protocol
Please refer PABX user’s manual about serial communication configuration for windows HyperTerminal operation
Gain SMDR data through TCP/IP
Most PABX support TCP/IP SMDR. Please refer PABX user’s manual about SMDR output parameter.
- PABX IP address: The IP address assigned to PABX
- Connect Port: Port for PC connection (Provided by PABX)
- Output Port: Normally it is same as connection port. Otherwise, user can set separately.
- User Name: User name to login PABX.
- Password: Password to login PABX
Carton
One year warranty