NAR5008/NAR5016/NAR5024/NAR5032 Standalone Telephone Recorder Specification
| Simultaneously recording channels | 8,16, 24,32 |
| Recording interface | RJ-11 |
| Available hard disk capacity | 500GB, 1TB&2TB are selectable |
| Displayer | Touch Screen 5’’ TFT |
| Maximum Recording Time | >140,000H |
| Start recording mode | timing, reversed polarity, keying, Voice Activated |
| Off hook detect voltage | <(3-80)V |
| On hook detect voltage | >(10-100)V |
| CID detected signal | DTMF/FSK |
| CID detect intensity range | 0 dB to –32dB |
| Affected Frequency range | 100 Hz to 3400 Hz |
| Input impedance | AC: 100K, DC: 5.1M |
| Signal-to-crosstalk ratio | >60 dB |
| S/N ratio | >70 dB |
| Input voltage | DC19V |
| Input voltage range | DC18V-DC24V |
| Operating current | 1.5A |
| Maximum current | 3A |
| Rating power consumption | 10W |
| Battery type | 2*12V/2C lead-acid batteries in series |
| Operating Temperature | 0℃ to 40℃ |
| Operating Humidity | 10% to 90 % |
| Network interface | RJ-45 |
| Accessories | DC19v power adapter, software, User Manual, DB37*2 RS232 |
| Dimension(L*W*H) CM | 43*39*9cm |
| Packing dimension(L*W*H) CM | 55*48*15cm |
| Net weight | 6.6kg |
| Gross weight | 9.1kg |
NAR5000Features
- System boots in 20 sec
- Support high capacity SATA HDD 500G/1T/2T
- Optional SD card model, max 64GB
- Expandable from 8 to 16, 24 and 32 channels
- Touch screen operation
- Optional model without touch screen (SD/HDD)
- Remote control by network
- Instant playback through speNAR5000er
- Full embedded device, no PC required
- Lower power dissipation supports 7x24x365 running
NAR4000 HDD Recording Hour /SD Recording Hour
- 500GB 36,000 Hour
- 1000GB(1T) 72000 Hour
- 2000GB(2T) 144000 Hour
Program System Requirement
1. Windows7/Vista/XP/2000
2. Pentium 400MHZ CPU
3. 256MB RAM
4. 1GB HDD
5. Network RJ45 port
6. Audio output (Play & Monitor)
PABX SMDR
There are 2 methods to gain the SMDR data from PABX
1. RS232
2. TCP/IP
User needs to analyze original data of PABX channel number, extension number from followed main parameters and input them to program setting.
Outbound call
1. Call symbol: The mark to distinguish the call type (Outbound/Inbound call) in character string. Most PABX show “TO “ to indicate outbound call.
2. Extension position: User have to count the extension number starting position in character strings.
3. Extension number length: Extension number length.
4. PABX channel number position: User has to count the channel number starting position in character strings.
5. Channel number length: PABX channel number length.
From followed example, user can read out outbound call information
- Call symbol: $TO
- Extension position: 14th
- Extension number length: 2.
- PABX channel position: 24th
- Channel number length: 2
PABX SMDR Protocol
Please refer PABX user’s manual about serial communication configuration for windows HyperTerminal operation
Gain SMDR data through TCP/IP
Most PABX support TCP/IP SMDR. Please refer PABX user’s manual about SMDR output parameter.
- 1. PABX IP address: The IP address assigned to PABX
- 2. Connect Port: Port for PC connection (Provided by PABX)
- 3. Output Port: Normally it is same as connection port. Otherwise, user can set separately.
- 4. User Name: User name to login PABX.
- 5. Password: Password to login PABX
