Specifications
1. cctv tester for both analog and ip camera2. 3.5 inch TFT LCD
3. Micro-SD cards
4. video record and playback
5. PING test
Application
1. 3.5”TFT-LCD, 480(RGB)x320
2. LED Lamp,easy to operate at night
3. Micro SD card moveable
4. User-defined shortcut keys(F1 and F2)
5. LCD screen brightness/contrast/color Saturation adjustable
6. Automatically adapts and displays the video format of NTSC/PAL
7. 10xzoom,video image can be magnified to view the details, easy to use
8. Video record and playback
9. Snapshot and save the current image as JPG file in the SD card
10.PING testing,test IP camera or other network devices’ ethernet port whether work normally,
and the IP address whether right
Model No. | JY-T006P |
Video Level test | |
Level test | Video signals measured in IRE or mV |
PTZ controller | |
Communication | Support RS232 and RS485 |
PTZ Protocol | Compatible with more than 30 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc. |
Baud Rate | 600,1200,2400,4800,9600,19200,57600,115200bps |
Video Signal Generation | |
Color bar generator | Output one channel PAL/NTSC color bar video signal for testing monitor or video cable.(red, green ,blue, white and black color ) |
UTP Cable tester | |
UTP cable test | Test UTP cable connection status and display in the screen. Read the number of the test box. |
DC12V 1A power output | |
DC12V power output | Output DC12V1A power for camera |
Audio input test | |
Audio input test | test the pickup and other audio equipments on the front-end |
RS485 data analysis | |
Data Monitor | Captures and analyzes the command data from controlling device |
10x Zoom Image | |
Image 10x zoom |
10x zoom image display and video out |
Photograph,Video record, Record playback | |
Photograph | snapshot and save the current image as JPG file |
Video record | Video record and storage the file |
Record playback | To view the storage file in the SD card |
Port flicker | |
Port flicker | Find the connected POE port quickly. |
IP scan,Link monitor,PING test | |
IP scan | Find out the connected IP camera or the other network equipment IP address quickly. |
Link monitor | Check the IP address whether is occupied |
PING testing | Test IP camera or Ethernet port of the other network equipment whether work normally, and check the IP address |
Cable scan | |
Cable scan | Search the cable by the audio signal |
PoE tester | |
PoE tester | Display the power supply voltage and cable connection states |
Digital Multimeter | |
AC/DC Voltage | 0-660V auto/manual range, the min resolution is 0.1mV |
AC/DC current | 660.0uA , 6.600mA, 66.00mA , 660.0mA, 10.00A |
Resistance | 660.0Ω, 6.600kΩ, 66.00kΩ, 660.0kΩ, 6.600MΩ, 66.00MΩ |
Capacitance | 6.6nf~66000uF, the min resolution is 1pf |
Diode | 0~2V forward voltage, the min resolution is 1mV |
Data hold | Hold and display the measured value |
Relative measurement | Display the relative power value |
Continuity testing | Built-in buzzer will sound, if resistance is lower than 50 Ω |
Testing speed | 3 times/ seconds |
Data range | -6600~+6600 |
Optical power meter | |
Calibrated Wavelength(nm) | 850/1300/1310/1490/1550/1625nm |
Power range(dBm) | -70~+10dBm |
Sensitivity(nW) | 0.001nW |
Connector type | FC/PC |
Data hold | Hold and display the measured value |
Relative measurement | Display the relative power value |
Visual fault locator | |
Visual fault locator | Test fiber’s bending and breakage ( SM and MM fiber) |
TDR Tester | |
TDR Tester | breakpoint and short circuit measurement(BNC cable, telephone cable) |
POWER | |
Power Adapter | DC 5V(1.5A) |
Battery | Built-in 3.7V Lithium polymer battery ,3000mAh |
Rechargeable | After charging 3-4 hour, working time lasts 11 hours |
Low Consumption | Energy saving technology, the battery icon real-time display |
Parameter | |
Operation setting | English/Chinese and other languages OSD menu |
Auto off | 5-60 (mins) |
Keytone | On/Off |
General | |
Working Temperature | -10°C~+50°C |
Working Humidity | 30%~ 90% |
Dimension/Weight | 194mm x 112mm x 48mm / 540g |