Specifications
ceramic pulley lagging for the belt pulley1.Five more own facotries
2.Manufacturer
3.CE AND ISO
4.mining,port ,coal,cement
Ceramic lagging pulley rubber sheet
There are many high alumina ceramic pulley lagging lined belt rollers in the steel industry, cement,mining ,port and so on. Usually,the rollers are wrapped by a layer of rubber to prevent them from slipping. But usually,if the roller works in the water environment, the material are easy adhere to the belt or roller. Then it can be easy slip.
Our Kingcera ceramic pulley lagging rubber sheet are adopt the new methods. We valcanized the grain shaped ceramic into the rubber and wrap onto the roller. it not only prevent the roller from slip, can also prolong the roller's service life span.
Advantages:
1.The rough surface of ceramic pulley lagging, prevent the belt and roller from slip.
2.Abrasion resistant, it can prolong the service life span 10 time at least.
3.Gutters between the ceramic are good for draining away water.
4.Easy installation
Applied industry:
The abrasion resistant ceramic lagging mats are widely used in the mining milling,smelting,port , cement ,steel ,chemical , coal fired thermal power plant .
The performance testing report for abrasion-resistant ceramic lagging
The performence | Content of AL2O3 | ≥95% |
Density | ≥3.6 g/cm3 | |
Rockwell hardness | ≥85 HRA | |
Rupturing toughness | ≥5.0MPa.m1/2 | |
Compression-resistant strength | ≥850MPa | |
Bend-resistant | ≥290MPa | |
Pull-apart strength(MPa) | ≥7.5 | |
Pull-apart prolongation(%) | ≥300 | |
Shore hardness | 55-65 | |
Permanent deform(%) | ≤24 | |
Adhesion of the adhesive agent and the ceramic(MPa) | ≥3.0 | |
The form service life of the adhesive agent | ≥15 | |
Temperature-resistant | ≤250°C | |
Coefficient of conducting heat. | 20w/m.k | |
The performance to be nonflammable | excellent | |
Coefficient of heat-expandability | 7.2×10-6m/m.K |
Size for Mining and Steel industry
500*500*16mm | 8mm rubber+8mm ceramic |
500*600*16mm | 8mm rubber+8mm ceramic |
The making procedure of the alumina ceramic tile
2.The pressing of alumina ceramic powder
3.The firing of the alumina ceramic tile
4.The checking for the alumina liner or the rubber
5.The installasions
6.The Applications
7.Our Exhibitions and customers
Looking forward to your great inquiry ,we'll give you our best service ..