Plastic oil heating injection mold temperature controller
Secure operating system of injection mold temperature controller |
1, Pump overload protection |
2, Thermal protection |
3, Ultra-high temperature protection |
4, Level detection |
5, Temperature detection |
6 ,Indirect ultra-high temperature refrigeration system is turned off series features |
7, Error alert system |
8, Alarm function
|
Electronic control of injection mold temperature controller |
1 With microprocessor programmable control-PID |
2 Precise temperature control ± 1 °C |
3 Shows set temperature and actual temperature |
4 Figures show |
5 changes can be adjusted to meet the needs of Digital |
6 Reset
|
Reliability of injection mold temperature controller |
1 Optimal vortex flow proportional pump |
2 Stainless steel heater |
3 Heat exchanger |
4 Run automatically detects the media |
5 Stainless steel pipe and fittings |
6 Replenishment default device |
7 Bypass |
Technical parameters of injection mold temperature controller
Model |
KNW-6kW |
KNW-9KW |
KNW-12KW |
KNW-18KW |
KNW-24KW |
KNW-30KW |
KNW-90KW | |||
Item | Unit | |||||||||
Medium | Water | |||||||||
Temperature Range | 30°C-120°C | |||||||||
Control Method | PID | |||||||||
Heating Power | Kw | 6 | 9 | 12 | 18 | 24 | 30 | 90 | ||
Pump | Motor capacity | Kw | 0.357 | 0.75 | 0.75 | 1.5 | 1.5 | 2.2 | 3.75 | |
Max. pressure | Bar | 2 | 2 | 2.5 | 2.5 | 3 | 3 | 3 | ||
Max. Flow | L/Min | 40 | 60 | 100 | 150 | 200 | 250 | 320 | ||
Cooling Method | Direct Cooling | |||||||||
Circulation System | Inch | 3/8″ | 3/8″ | 3/8″ | 1″ | 1″ | 1″ | 2″ | ||
Cooling System | Inch | 1/2″ | 1/2″ | 1/2″ | 1/2″ | 1/2″ | 1/2″ | 3/4″ | ||
Power Supply | AC 380V/415V/3phase/50Hz | |||||||||
Dimensions(L*W*H) | mm | 750x280x660 | 800x330x660 | 800x330x660 | 800x330x660 | 1030x410x950 | 1030x410x950 | 2160x850x1650 | ||
Weight | Kg | 70 | 75 | 80 | 90 | 140 | 160 | 360 |
Details of injection mold temperature controller