Specifications
raw material: PE, PP, PVC, PC, ABS, TPU,lower energy consumption
Microcomputer intellectualized controlling
Self-diagnosis
Fully Automatic Hydraulic Extrusion Blow Molding Machine
Application: All kinds of plastic bottle made of PE, PP, PVC, PC, ABS, TPU, etc.
Characteristic: 1, Microcomputer intellectualized controlling, self-diagnosis alarm, clear at a glance,
2, Hydraulic system with imported proportional valve, lower energy consumption. At the same time, a significant reduction in oil temperature extends the service life of hydraulic parts.
3, Variety of functions for different products matching the technological requirements: bottom blow and lift, rotation, encapsulation, material support, sub-mould, robot, parison control system, de-flashing system, etc.
Item | Unit | JKB50-2L |
Max. Product Volume | L | 2 |
Dry Cycle | pcs/h | 1500 |
Screw Diameter | mm | 50 |
Screw L/D Ratio | L/D | 24 |
Screw Drive Power | kw | 11 |
Screw Heating Power | 3*kw | 4.2 |
Screw Heating Zone | Zone | 3 |
HPDE Output | kg/h | 35 |
Oil Pump Power | kw | 5.5 |
Clamping Force | KN | 40 |
Mold Stroke | mm | 138-368 |
Max. Mold Size | W×H(mm) | 300×320 |
Max. Die Diameter | mm | 100 |
Die Heating Power | 4*kw | 1.8 |
NO. of Heating Zone | Zone | 3 |
Blowing Pressure | Mpa | 0.6 |
Air Consumption | M³/min | 0.4 |
Cooling Water Pressure | Mpa | 0.3 |
Water Consumption | L/min | 35 |
Machine Size | L×W×H(mm) | 2.5×1.5×2.4 |
Machine Weight | Ton | 3.2 |