cutting table corrugated
Introduction
DCZ75 series high speed flatbed digital cutter is the AOKE new developed cutting system for the industries as packaging, printing, ads, display etc. It has two independent module design, very good expansibility and exchangeable tools. It equips versatile tools as vibrating knife, creasing wheel, drag knife, V cut knife, which can cut the materials up to 60mm thick, and capable with many kind of materials such as corrugated paper, honeycomb board, card paper, foam, grey board, KT board, PVC expansion. DCZ75 machine takes the whole new table design of steel frame and the table vacuum zone, which enables the stronger suction and more stable mechanical properties. Thanks to the auto tool height system, it makes the machine smarter, just by pressing one key then the tool depth can be set automatically, therefore avoid the overcut of the table.
main features:
New steel frame design, more stable of machinery
Auto tool height make the tool settings more convenience
Cutting depth up to 60mm thickness, cover the major materials.
Two independent module, exchangeable tools.
New vacuum zone, stronger suction
Knife tool
No. | name | application | Note |
1 | 16 degree knife | Used to cut materials between 10mm to 15mm thick. Cutting materials: corrugated board, paper board, Kraft paper, gray board, offset board, honeycomb board, KT board and compound materials, etc. |
|
2 | 20 degree knife | Used to cut materials between 7mm to 10mm thick. Cutting materials: corrugated board, paper board, Kraft paper, gray board, offset board, honeycomb board, KT board and compound materials, etc. |
|
3 | 26 degree knife | Used to cut materials between 5mm to 7mm thick. Cutting materials: corrugated board, paper board, Kraft paper, gray board, offset board, honeycomb board, KT board and compound materials, etc. |
|
4 | 39 Degree Drag knife | Used to cut materials within 3mm thick. Cutting materials:paperboard, Kraft paper, gray board,offset board, self-adhesive paper and compound materials, E corrugated etc. |
|
5 |
Special knife | Used to cut materials within 2mm thick cutting materials:paperboard, Kraft paper, gray board,offset board and self-adhesive paper,etc. |
|
6 |
Foam knife | Used to cut foam and other soft materials less than 60mm thick. |
|
7 | V cut knife | Used for making V groove on the Honeycomb board and grey board |
|
8 | Grey board V cut knife | Used to making V groove on the grey board to make the gift box. |
|
9 | Double edge knife | Mainly for the thick and hard materials such as grey board, PP etc. |
|
*10 | 30 degree knife | Mainly for the hard material such as carbon gasket, gasket, ruber, grey board, PP etc. | Option |
Creasing wheel
No. | name | application | Note |
1 | 3mm creasing wheel | creasing thickness: between 3mm and 5mm corrugated board. |
|
2 | 5mm creasing wheel | creasing thickness: between 5mm and 7mm corrugated board. |
|
3 | 7mm creasing wheel | creasing thickness: between 7mm and 10mm corrugated board. |
|
4 | 2mm creasing wheel | creasing thickness: within 2mm,such as corrugated board, paperboard, Kraft paper, gray board,offset board, composite materials etc. |
|
*5 | PVC creasing wheel | Used for PVC, plastic box, PVC corrugated etc. | Option |
*6 | Double line creasing wheel | Creasing thickness between 10 mm to 15mm 3A corrugated paper. | Option |
Pen
No. | name | application | Note |
1 |
Pen | Drawing |
|
Specification:
Model | DCZ752516 | DCZ751713 | DCZ751310 |
Effective cutting area | 2500*1600mm | 1700*1300mm | 1300*1000mm |
Configuration | Oscillating knife,pen,creasing tool,drag knife, foam tool, v cut tool | ||
Max speed | 1400mm/s | ||
Smallest cutting diameter | 6mm | ||
Maximum cutting thickness | 60mm | ||
Control line and driver | Servo | ||
Precision | ≤0.1mm | ||
Vacuum | 5.5kw | ||
Data form | HPGL,DXF,PDF | ||
Voltage | 220v±10%50Hz | ||
Data port | parallel port,serial port,USB port | ||
Data Transmission speed | 10MB/s | ||
Input cushion area | 32MB | ||
Occupy dimension(L*W*H) | 3400*2460*1180mm | 2600*2160*1180mm | 2200*1860*1180mm |
Note | Other size can be customized. | ||
