Basic Parameter | |
Applicable Material | PC |
Max. Product Volume | 25L |
Dry Cycle | 600 pcs/h |
Machine Size (L×W×H) | 4.95×4.3×3.1(M) |
Machine Weight | 13.5T |
Total Power | 70KW |
Power Consumption | 45KW/H |
Plasticizing System | |
Specification | good plasticizing capability, high output, transducer adjust speed, collect temperature-control signals to prevent the screw from cold starting |
Hydraulic motor | High torque, low noise hydraulic motor |
Machine Barrel Screw | 82mm,L/D=33, 38CrMoALA high quality nitrogen steel |
Plasticizing | 120Kg/H |
Heating Zone | 8Zone Casting, aluminum heater |
Heating Power | 21K W |
Cooling fan | 8zones 185W |
Extrusion System | |
Specification | Accumulator die head twist type runner, first in first out |
Max. Dia. of Die Head | 150mm |
Heating Zone | 4 zone heat coil of stainless steel |
Heating Power | 8 KW |
Die Heat Huff | Pressure and capacity can be adjusted |
Preform Adjustment | Automatic |
Heat insulation | By heat insulating board between accumulator and hydraulic cylinder |