Semi-automatic tin can making machine for food can welding
1.Main technical data.
Mode | FH18-90-II |
Linear rate of welding | 6-18m/min |
Production capability | 20~40Cans/min |
Applicable can diameter | Φ220~Φ290mm |
Applicable can height | 200~420mm |
Applicable material | Tinplate steel-based |
Applicable material thickness | 0.22~0.42mm |
Applicable copper wire diameter | Φ 1.38mm Φ 1.5mm |
Seam welding landing | 0.8mm 1.0mm 1.2mm |
Seam point distance | 0.5-0.8mm |
Cooling water | Temperature:15-20°CPressure:0.4~0.5Mpa Discharge:7L/min |
Power | 380V±5% 50HZ |
Total power | 18KVA |
Dimension | 1200×1100×1800mm |
Weight | 1200Kg |
2.Latest picture
********************************************************************************************************
******************************************************************************************************************
3.Our major component suppliers:
1, PLC(Programmable Logic Controller) s purchased from Japanese MITSUBISHI.
2, Low voltage apparatus are produced by SCHNEIDER.
3, IGBT(Insulated Gate Bipolar Transistor) is bought from Japanese FUJI.
4,OMRON is our sensor supplier.
5, HMI(Human Machine Interface) is purchased from WEINTEC Labs.,Inc in Taiwan.
4.Can making technology process
Cutting-----rounding-----welding-----coating-----drying-----pre-curling and expanding-----flanging-----seaming bottom-----beading and curling
5.Applicable types of cans
aerosol cans, food cans, beverage cans, chemical cans , paint pot and square bucket etc.
FH18-90-IISemi-automatic tin can making machine/welding food cans/can body welding machine.