Specifications
no-asbestos mineral fiber factory1.Length :1.8-8
2. Use :paint
3.Asbestos content : 0
4.Dregs : 5-9(0.25mm below)
1.The introduction of no-asbestos mineral fiber :
According to specified recipe, being melting in the resistance furnace and spurting and blowing by multi-roll centrifugal force into cotton fibers, and after being cut, separate, edulcorated and classified, Jinli Non- Asbestos Mineral Fiber is produced by the advanced techniques at present.
2.Physical and chemical properties:
| Chemical composition | SiO2 | Al2O3 | Fe2O3 | Ca+MgO | Na2O+K2O |
32-55 | 7-21 | 1-6 | 35-50 | 1-3 | |
| Colour | Gray White light yellow | ||||
The average length ofL mm | 1.8-8 (Or according with customer needing ) | ||||
The average diameterD um | 3-8 | ||||
Vector burning 800 C° / h | 4-9% | ||||
Water content | ≤1.5% | ||||
Capacityg/cm3 | 15-25 | ||||
Slag ball content | 0.5(mm) above | none | |||
0.25(mm) under | 5-9 | ||||
Asbestos content | 0 | ||||
3.Use of no-asbestos mineral fiber :
It is now widely used in petroleum, chemical industry, electric power owing to its heat-resistance,water-resistance,noise-absorption and fine springy property etc.
JinLi Mineral Company has taken lead in developing and producing many kinds of function ,specialized fiber , which fiber is more slender more soft and simply operating by staff and with better intensity and also it is less dregs and easy to loose .It is well used in building and coating meterials,asbestos products, glass fiber products, fricting and sealing materials.
4.pictures of no-asbestos mineral fiber :
