| Rated Output:: | 11.0kW | SRated Speed:: | 2000 RPM |
|---|---|---|---|
| Power Supply Specification: | 200-230VAC 3-phase | Brand: | Mitsubishi Industrial Servo Motor |
| Model Item: | HC-RFS203K | Plan Of Original: | Japan |
| High Light: | ewing machine servo motor,ac servo motor | ||
MITSUBISHI HC-RFS203K Product information and technical parameters:
Brand: MITSUBISHI
Name: Ultra low inertia medium power motor
Model: HC-RFS203K
Motor series: super low inertia, medium power.
Rated output power: 2.0kw.
Rated speed: 3000r/min.
Whether to take the brake: No.
Shaft keyway: (open slot).
Protection level: IP65 (IP67).
Features: ultra low inertia is suitable for high frequency operation.
Application example: ultra high frequency transmission machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring.
Rated output: 0.1KW.
Rated speed: 3000r/min.
Electromagnetic brake: there.
Control complex, easy to achieve intelligent,
The electronic commutation method is flexible and can be changed by square wave or sine wave.
Motor maintenance free, high efficiency, low operating temperature,
Electromagnetic radiation is very small, long life, can be used in a variety of environments MITSUBISHI HC-RFS203K HC-RFS203K
AC servo motor is brushless motor, which is divided into synchronous and asynchronous motor,
Synchronous machines are commonly used in motion control,
Its power range, you can do a lot of power.
Large inertia, the maximum rotation speed is low, and with the increase of power and rapid reduction.
So it is suitable for the application of low speed and stable operation MITSUBISHI HC-RFS203K.
The rotor of the servo motor is permanent magnet,
Drive controlled U/V/W three phase electric electromagnetic field,
The rotor rotates under the action of the magnetic field,
At the same time the motor comes with the encoder feedback signal to the drive,
According to the feedback value and the target value, the driver is compared,
Adjust the rotor rotation angle MITSUBISHI HC-RFS203K.
The accuracy of the servo motor is determined by the accuracy of the encoder. Motor series: low inertia, medium power.
Rated output power: 11.0kw.
Rated speed: 2000r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.
Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery.
High resolution encoder 131072p/rev (17 bit).
The encoder with high resolution ensures excellent performance and stability at low speed.
All motor dimensions are the same as before and all are compatible with the wiring. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 0.1kw.
Interface type: CC-Link communication type (built-in positioning function).
Power specification: single phase AC200V.
Positioning operation by setting position and rotational speed data in the positioning table and receiving the start signal from the main controller.
The setting of the position and speed of the positioning table, as well as the start and stop operation can be completed through CC-Link communication.
By using the MR-J3-D01 extension IO unit, the DI/O instruction can be used to select and locate the table.
(CC-Link can not be used for MR-J3-D01 communications).
With built-in positioning function of the servo amplifier, can be set through the CC-Link communications and speed data. (corresponding to the CC-Link version: Ver.1.10)
Can be achieved through the CC-Link communications to start, stop and monitoring aand other operations HC-RFS203K.
Serial communication reduce wiring.
Distributed servo control system can be built by CC-Link communication.
The parameters of unit MR-PRU03 (optional) the parameter setting, operation and monitoring more convenient.
The servo amplifier can be used for speed control operation HC-RFS203K.
When the two stations are occupied, the speed can be set directly by the remote register.
| Servo System Controller | Servo Amplifiers & Motors | ||
| Motion CPU, independent stand-alone controllers, | Servo amplifier/drives, used in high-precision | ||
| positioning module products | positioning servo motor control system | ||
| MELSEC iQ-R series | Servo system controller | MR-J3 series | Servo amplifiers |
| MELSEC-Q series | Multi-CPU precision control | HF-KP series | Servo Motor 200V |
| MELSEC-L series | Motion positioning module | HF-SP series | Servo Motor 400V |
| Electromagnetic clutches and brakes | Tension Controller | ||
| Supports high-speed, high winding/unfolding | High-speed, high winding process and expand | ||
| tension, longer material control operations. | operations tension control | ||
| ZK, ZHA series | Magnetic clutch | LE, LD series | Automatic tension control unit |
| ZKG, ZHY series | Magnetic brake | LM-10,LX-TD series | Tension detector |
| Human Machine Interface (HMI) -GOT | Low-voltage circuit breaker contactor | ||
| Good compatibility with machine, high performance | MS-N series | Motor starters | |
| GOT, productivity and efficiency. | SD-N, S-N series | Electromagnetic contactor | |
| GT,GS seriess | GOT HMI | NF,BH-D6,CP series | Low-voltage circuit breaker |
