MC201NS302KSN24 Nidec Sankyo OTC DAIHEN electric Rotary Servo Motor
| Brand Name |
Nidec Sankyo |
| Place of Origin |
Japan |
| Model Number |
MC201NS302KSN24 |
Product Features
Detailed Product Description
| Category: | Industiral AC Servo Motor | Model: | S10HL02 |
|---|
| Rated Power: | 100W | Series: | S10HL02 |
|---|
| MOQ: | 1 | Brand: | Nidec Sankyo (Japan) |
|---|
| High Light: | ewing machine servo motor,electric servo motor |
|---|
Nidec Sankyo OTC DAIHEN AC SERVO MOTOR W-L00574A S10HL02 100W Industrial Electric Motors
Nidec Sankyo Industrial Servo Motor's Use Applications
Embroidery Machine,Textile Machine,Packaging Machine etc
Removal Robot
Conveyer Machine
Processing Machine
Precautions
Using the motor with rotations of 180 degrees or less will reduce the encoder's rotational accuracy.For a motor equipped with a brake, follow the brake voltage and polarity specifications.If the brake voltage is less than 12 V or the polarity is reversed, the encoder's rotational accuracy will be reduced.
Installing Precautions
Never remove the encoder or dismantle the motor body.
The motor shaft has anti-rust oil applied at the shipment. Please wipe off the oil before installing the motor. Make sure to perform centering (alignment) carefully and properly.
Operating the motor without sufficient alignments might cause vibrations or a shorter service life of the motor.
Installation Orientations and Oil Seals
The motor can be installed either vertically or horizontally. Please observe the following precautions.
Horizontal installation: Face the cable pull unit down in order to protect the motor against oil, water and dust.
Vertical installation : For a motor combined with a decelerator being on top of the motor shaft, use an oil sealed motor to prevent the decelerator oil from seeping into the motor.
Features
Suitable for applications with high speed rotations.Can be used for most applications.
Suitable for applications with low mechanical rigidity such as drive belt machinery.
Types of Sankyo Industrial AC Servo Motor| Inertia | Low Inertia
Middle Inertia
High Inertia |
| Flange Size | 40 mm x 40 mm
60 mm x 60 mm
80 mm x 80 mm
130 mm x 130 mm |
| Rotational Speed | Rated Motor Speed / Max. [r/min]
2,000 / 3,000 [r/min]
3,000 / 6,000 [r/min] |
| IP Code | IP65
IP67 |
Find Similar Products By Category
