Specifications
Joint sample preparation equipmentGB474-2008/ISO standard
PLC intelligent control
Full automatic sample cleaning device
TYPICAL APPLICATIONS
This unit is designed and manufactured in accordance with the standards and procedures specified in GB474-2008 strictly. It is used for sample preparation of the coal or other medium hard solid material for component analysis by quick feeding, crushing, mixing and dividing and self-cleaning continuously. (Inspections show the samples precision of machine meets national standard without systematical difference.)
ESPECIALLY SUITABLE FOR
GM/PΦ-AXSWN |
The unit is especially suitable for sample preparation work in the laboratory of industrials of coal, electricity, nonferrous metal, metallurgy, chemic, environment-friendly department, scientific research and so on.
ADVANTAGES
- PLC intelligent control and touch screen operation, the whole procedures of sample preparation work will be finished automatically, which improves the working efficiency greatly and insures the precision and also can avoid the manual error.
- The full automatic sample cleaning device insures no material blocking when the moisture content of material is less than 25%.
- Equipped with failure alarm system and inquiry system.
- Automatic dust extracting device, no dust leak out and meet the requirement of environment protection.
-
High capacity of sample preparation, which is up to 40kg/h.GM/PΦ-AXSN
- Automatic cutter-chute division system makes sure the representation of sample.
- The main parts are made of special material; the service life is 3-5 times of the normal one.
- Full-sealed design meets the requirements of work safety. And the door makes daily maintenance more convenient.
- It can work normally on the flat ground without fixing any base.
TECHNICAL PARAMETER
MULTI-FUNCTION INTEGRATED SAMPLE PREPARATION SYSTEM | ||
Model No. | GM/PΦ-AXSWN | GM/PΦ-AXSN |
Feeding size of primary crushing (mm) | ≤150 | |
Discharging size of primary crushing (mm) | ≤13 or ≤6 (Adjustable) | |
Division ratio of primary crushing | (About)1:2,1:4,1:8,1:16(Adjustable) | |
Discharging size of secondary crushing (mm) | ≤1 or ≤3(Adjustable) | |
Division ratio of secondary crushing | (About)1:2 | |
Capacity (kg/h) | 1000-2000 | |
Total moisture of material | ≤25% | |
Overall dimensions (mm) | 2950×2830×2200 | 2950×950×2200 |
Motor power(kw) | 15 | |
Working power supply (V) | 380 | |
Total weight (kg) | 1200 | 1100 |
Feature | Full sealed automatic material feeding and abandoning system. | Full sealed automatic material feeding system. |
