Sales China Manufacture Small Disassemble DTH Hammer Equipment
Products Feature
This handy but powerful DTH Hammer disassembling equipment can easily be placed in a workshop or container and it breaks DTH hammers between 3-8".
Model | BLHB-5 | BLHB-8 |
Operate Hammers | 3''-5'' | 6''-8'' |
Length (mm) | 920 | 1100 |
Width (mm) | 510 | 620 |
Height (mm) | 875 | 875 |
Weight (kgs) | 200 | 230 |
Please Noted!!! The DTH Hammer disassembling equipment is delivered with wrench keys.
Operation Method
1). Put hammer on the equipment.
2). Adjust the position of the hammer and wrench; use wrench to block the top sub side of hammer; let wrench and jack in the same face.
3). Fix K-shaped base with nut.
4). Fix wrench with nuts.
5). Shake handle of jack slowly till top sub away from hammer.
6). After top sub dismantled, grease the jack, release nuts, discharge the K-shaped base and turn around the hammer.
7). Adjust the position of hammer and wrench; use wrench to block the drive chuck of hammer; let wrench and jack in the same face.
8). Fix hammer
9). Fix K-shaped base and the wrench with nut.
10). Shake handle of jack slowly till drive chuck away from hammer.