Company Introduction
Located in Anyang,Anyang Xinzheng Metallurgical Materials Co., Ltd was founded in 2003. Our company enjoys a geographically advantaged transportation. The factory covers an area of 12,000 square meters, with registered capital of 6.8 million. The annual sales is 213.815 million, paying tax 13.731 million. It has over 120 employers, of which 30 are senior and professional technicians
business scope
The main products contain many ferro alloys such as FeSi, SiMn, CaSi, SiAl, NCrFe, SiAlCa, SiAlCaBa, SiBaCaMg, and all kinds of ferro alloy cored wire, as well as refractory materials such as slag fluxing agent, silicon briquette, drainage sand, ladle castable, SiC deoxidizing agent, compound recarburizer and MnC ball. All specifications can be adjusted according to the customer's demands.
Product Introduction
Ferrosilicon Briquette is a good substitute for ferrosilicon alloy
Ferrosilicon ball selected ferrosilicon powder, ferrosilicon particle , pressed into the same ingredients, and reduces the cost. It is good to improve furnace temperature, increase the flow of molten iron with effective deslagging, increase the label, raise pig iron casting toughness and cutting ability. The uniformity of product particle size, the use of fuel saving, melting faster, uniformly distributed, which is the best material for casting smelting pig iron.
Silicon briquette is the new product that our company developed. silicon briquette is mainly repressed by silicon metal or ferrosilicon powder. It’s a good substitute for Ferro silicon in steelmaking, which has advantage in reducing the cost of production and reusing resource.Now there are far and wide markets in domestic and oversea market.castable, SiC deoxidizing agent, compound recarburizer and MnC ball. All specifications can be adjusted according to the customer's demands.
Grade | Particle size(diameter) | Chemical composition(%) | ||||
|
| Si | C | S | P | Al |
|
| ≥ | ≤ | |||
FeSi55 | 30-50mm | 55 | 5 | 0.1 | 0.05 | 3 |
FeSi50 | 30-50mm | 50 | 5 | 0.1 | 0.05 | 3 |
FeSi45 | 30-50mm | 45 | 1.5 | 0.1 | 0.1 | 1.5 |
FeSi40 | 30-50mm | 40 | 1.5 | 0.1 | 0.1 | 1.5 |
Remark | content of chemical composition can be adjusted according to customer requirements | |||||
Silicon briquette | |||||||
Type | Si | Fe | Ca | C | Al | S | P |
|
|
| ≤ | ||||
Si briquette-1 | 50-65 | 1-3 | 3 | 5 | 5 | 0.1 | 0.05 |
Si briquette-2 | 50-65 | 6-9 | 3 | 5 | 4 | 0.1 | 0.05 |
HC-Si briquette | 50-65 | 2-4 | 3 | 10-20 | 5 | 0.1 | 0.05 |
FeSi briquette | 50-65 | 15-20 | 2 | 1 | 1.8 | 0.05 | 0.04 |
LCa-FeSi briquette | 50-65 | 15-20 | 0.5 | 0.1 | 1.8 | 0.05 | 0.03 |
Application
1. Silicon briquette is made of ferro silicon powder or granules. Its main content is as the same as ferro silicon.
2.It can reduce the cost of steelmaking. Now there are far and wide markets in domestic and overseas Good deoxidizating effect, short deoxidizing time, save energy Improve efficiency of steelmaking, reduce consumption of raw materials,high recovery rate Less artificial labor intensity,faster melting speed, lower power consumption is the best material for casting smelting pig iron.
Silicon briquette is the new product that our company developed. silicon briquette is mainly repressed by silicon metal or ferrosilicon powder. It’s a good substitute for Ferro silicon in steelmaking, which has advantage in reducing thecost of production and reusing resource.Now there are far and wide markets in domestic and oversea market.
Ensured Supply Capability
We specialize in ferroalloy for 11 years. Our company enjoys a broad range of high grade raw material supplied from Ningxia, Guangxi, Hunan, Sichuan, Shanxi, Yunnan , Guizhou, Inner Mongolia, etc. All finished products’ quality meet ISO standard, and all specifications can be adjusted according to the customer's demands, the product quality is highly steady and guaranteed.
Packing: 1 ton into jumbo bag , or as per customers’ need.
Certification: CIQ, SGS,
Guarantee
Our company have formed our own network and market for our finished products, offering big-sized steel corporations, gaining good trust from regular users by the stable quality as feedback, holding a heritage and reputation that goes back over 10 years. Our seniors have been working in metallurgy industry for decades and accumulating plenty managerial experience that can ensure our successful operation for manufacture.
Upholding the tenet of “quality first, customer paramount ”, we have established the afte-sales system and the user feedback network. Sticking to the corporate spirit of winwin and mutual benefit, we are ready to sincerely cooperate with our domestic and overseas customers for a greater future.