Located in Anyang,Anyang Xinzheng Metallurgical Materials Co., Ltd was founded in 2003. Our company enjoys a geographically advantaged transportation. The factory covers an area of 12,000 square meters, with registered capital of 6.8 million. The annual sales is 213.815 million, paying tax 13.731 million. It has over 120 employers, of which 30 are senior and professional technicians. The main products contain many ferro alloys such as FeSi, SiMn, CaSi, SiAl, NCrFe, SiAlCa, SiAlCaBa, SiBaCaMg, and all kinds of ferro alloy cored wire, as well as refractory materials such as slag fluxing agent, silicon briquette, drainage sand, ladle castable, SiC deoxidizing agent, compound recarburizer and MnC ball. All specifications can be adjusted according to the customer's demands.
Atomised Ferro Silicon 15 is a specialised powder product formed by melting FeSi75 with scrap and casting into a highpressure water jet. Particle size is typically between 212 microns and 20 microns. The principal properties of FeSi15% are magnetism, corrosion resistance and density. Atomised Ferro Silicon 15% is mixed in water to create a dense medium and finds uses in the mining and scrap processing industries. Dense medium separation is a gravity separation technique which creates a medium with a specific density. This medium allows lights to float and heavies to sink, thus permitting separation due to density. The process typically separates aluminium, magnesium and mixed heavy metals such as copper alloys, thereby increasing overall scrap metal recycling rates. After sizing, the mixed feed is screened and then sent to a drum containing magnetite media which removes the lower density waste (rubber, plastic, etc) and light metals such as magnesium alloys. The heavy concentrated scrap is then directed to a second drum containing FeSi media which separates the aluminium from other metals. These two media, namely Magnetite and FeSi, create different media densities and can be adjusted, within certain limits. Atomised Ferro Silicon 15% is usually supplied in big bags or in steel drums.
Chemical Content
FE | Si | Ti | Al |
70-85% | 12-18% | 0-8% | 0-3% |
Data Sheet
Product Designation(mesh) | +48 | +65 | +100 | +150 | +200 | +325 | -325 | ||
Particle Size(micron) | Percentage by mass | ||||||||
48MESH | 0-6 | 0-8 | 6-14 | 14-22 | 17-25 | 22-30 | 14-22 | ||
65MESH | 0-4 | 0-6 | 3-11 | 11-19 | 15-23 | 25-33 | 23-31 | ||
100MESH | 0-2 | 0-4 | 0-6 | 80-90 | 0 | 0 | 0 | ||
200MESH | 0 | 0-2 | 0-2 | 0-4 | 4-12 | 30-80 | 0 | ||
48D | 0 | 0-2 | 1-9 | 10-18 | 14-22 | 27-35 | 27-35 | ||
65D | 0 | 0 | 0-2 | 0-6 | 4-15 | 29-33 | 47-55 | ||
100D | 0 | 0 | 0-2 | 0-3 | 0-7 | 25-33 | 61-69 | ||
150D | 0 | 0 | 0-1 | 0-1 | 0-4 | 16-24 | 73-81 | ||
270D | 0 | 0 | 0 | 0-1 | 0-3 | 5-13 | 85-93 | ||
0-3MM | -- | -- | -- | -- | -- | -- | -- | ||
Applications
1 Milled Ferro Silicon 15# is a magnetic ferro silicon produced in electric arc furnaces and subsequently milled to size ranges required. In addition, Milled Ferro Silicon contains aluminum and titanium which enhances its resistance to corrosion.
2 Milled Ferro Silicon 15# is used in slurry density applications for heavy media separation and sink-float processes. Powdered Ferro Silicon is an accepted medium for the gravity separation of minerals, aggregates and metals with a specific gravity of approximately 2.0 to 4.0.
3 Milled Ferro Silicon 15# is used extensively in the dense media separation process in both the metal recycling and mining sectors.
Packing:
50kg into drums (steel or plastic)
20kg into per bag and 50 bags on a pallet
1000 kg into jumbo bag on a pallet.
We specialize in ferroalloy for 11 years. Our company enjoys a broad range of high grade raw material supplied from Ningxia, Guangxi, Hunan, Sichuan, Shanxi, Yunnan , Guizhou, Inner Mongolia, etc. All finished products’ quality meet ISO standard, and all specifications can be adjusted according to the customer's demands, the product quality is highly steady and guaranteed.
Our company have formed our own network and market for our finished products, offering big-sized steel corporations, gaining good trust from regular users by the stable quality as feedback, holding a heritage and reputation that goes back over 10 years. Our seniors have been working in metallurgy industry for decades and accumulating plenty managerial experience that can ensure our successful operation for manufacture.
Upholding the tenet of “quality first, customer paramount ”, we have established the after sales tracking system and the user feedback network. Sticking to the corporate spirit of winwin and mutual benefit, we are ready to sincerely cooperate with our domestic and overseas customers for a greater future.