Features:
1. This series of button presses to switch clutch rigid, simple structure, operation, maintenance convenience, with helical gears, smooth, low impact, low noise. J23-25-type open type tilting press for domestic first file will drive the sliding bearings (is copper tiles) to the rolling bearing, change the file after the transmission wear, to avoid the wear of copper tile result of larger gear noise ;
2. J23-35 open type tilting press is unique to the industry, other domestic manufacturers of the basic body with 35T 25T press body press, transmission profile copper tiles. We will redesign the body alone, 35T 25T body is far more important than the fuselage (body strength and good), while transmission of Rolling (gear noise), equivalent to a general sense of the type light 40T press;
3.80T than double the tonnage presses are pneumatic balance cylinder structure, balance, small fluctuations, balance the weight of the slider and the upper die to avoid the weight generated by the shaking machine, you can prevent the transmission in reverse gear force impact and the resulting noise, can eliminate the gap between the rod and the slider, reduce the impact of stress and wear parts; can prevent brake failure or a link broken, the slider caused by falling accident.
| Parameters | Unit | J23-6.3 | J23-10 | J23-16 | |
| Nominal pressure on sliding block | KN | 63 | 100 | 160 | |
| Nominal pressure | mm | 2 | 2 | 2 | |
| Stroke Sp | |||||
| Slide Stroke | mm | 35 | 45 | 55 | |
| Stroke frequency | Fast speed | times/ | 170 | 145 | 120 |
| Low speed | min | ||||
| Die height | mm | 150 | 180 | 220 | |
| Die Height Adjustment | mm | 30 | 35 | 45 | |
| Distance between slider center and machine | mm | 110 | 130 | 160 | |
| Vertical columns distance | mm | 150 | 180 | 220 | |
| Slider bottom Size | L*R | mm | 140 | 170 | 200 |
| F*B | mm | 120 | 150 | 180 | |
| Size of | Diameter | mm | 30 | 30 | 40 |
| Handle Hole | Depth | mm | 55 | 55 | 60 |
| Size of Worktable | L*R | mm | 310 | 370 | 450 |
| F*B | mm | 200 | 240 | 300 | |
| Thickness of Worktable | mm | 30 | 35 | 40 | |
| Max. Inclination Angle | 45 | 35 | 35 | ||
| Worktable height | mm | 750 | 730 | 750 | |
| Size | F*B | mm | 780 | 900 | 1150 |
| L*R | mm | 620 | 665 | 847 | |
| High | mm | 1503 | 1658 | 1910 | |
| Anchor bolts distance | F*B | mm | 530 | 610 | 780 |
| L*R | mm | 314 | 394 | 450 | |
| Power of electric motor | KW | 0.75 | 1.1 | 1.5 | |
| Weight(Approximate) | KG | 420 | 595 | 1095 | |
