Specifications
Polishing Tumbler1)available in two size viz. 250 kgs. and 500 kgs. Capacities per charge
POLISHING BARREL |
|
INSTRUCTIONS : 1) Load the polishing barrel with wire nails 3 to 4 inches above the half size of the barrel and remaining portion with Saw Dust. If the Nails are found rusty, it is advisable to Mix a little quantity of paraffin oil (Half liter Kerosene) prior to loading of Saw Dust. Rotate the barrel with blind lid on, for about 10 minutes. After this process, load the barrel with Saw Dust and rotate the barrel for about 30 minutes fixing blind lid-take out blind lid and fix up perforated lid to take out Saw Dust from the barrel by rotating. Continue this process again for about 40 minutes loading the barrel with fresh saw dust. This will result into bright shining look of Wire Nails. The Saw Dust used in second sequence can be re-used for the first cycle of the same process in next batch. This ensures economy of Saw Dust and solving the storage space. |
- Wire Nail Polishing Machine
- Wire Nail Polishing Tumbler
- 500 kgs. Polishing Barrel
- Wire Nail Polishing
- Nail Polishing Barrel