The dryer is based on the principle of centrifuge and hot air convection.
To dry the work pieces rapidly, the dryer uses a motor to drive the belt, the stainless steel cylinder rotates and most of water is thrown off.
The electric heating tube installed on the lid of cylinder heats air, then the formed thermal current heats the work pieces circularly.
Using the brake pedal, the dryer can be stopped quickly after the work pieces have been dried completely and the production efficiency may be improved.
Using the switch and dashpot relay, the dryer can prevent creep age, over-loading and short circuit of the lines and the motor.
Mode | Capacity | Working capacity(kg) | Motor power | Electricity | Motor speed | Size of basket | Heating Power | Size of machine | Weight | Working temperature( ° c) |
| (L) | (KW) | (V/HZ) | (r/min) | (mm) | (KW) | (L×W×H) mm | (Kg) | |||
| HXCG-35 | 35 | 35 | 0.75-4P | 380/50 | 1420 | φ390×270 | 3 | 820×700×800 | 60 | 50-80 |
| HXCG-70 | 70 | 70 | 1.1-4P | 380/50 | 1420 | φ490×330 | 3 | 1020×790×850 | 80 | 50-80 |
