CGP 40KW induction heater
this is the induction quenching machine for the quenching demand it could be best suitable for those machine demands
the left is the DDCGP40 induction quenching machine it is the power supply for the induction quenching demands
the right is the induction quenching machine for the gear and the shaft quenching machine demands , it can best suitable for the induction heating mahcine working demands
this is CGP40KW INDUCTION HEATER FOR THE QUENCHING MACHINE DEMANDS
Induction quenching machine demands
Major features:
1. | The Power Unit is based on IGBT, imported from Germany; |
2. | High power factor, and energy efficient; |
3. | Heating duty running, 24 hours 100% full loading; |
4. | Easier and more safe operation comparing with the traditional oil/gas heaters; |
5. | Timing function applied for heating duration setting, adjustable (0.1s-99.9s) |
this is the machine power supply for the induction hot quenching mahcine working demands it could be best suitbale for the induction hot forging machine demands , then as for those machine the best use is to making the best suitable machine demands
40KW induction quenching heater
Product technical parameters:
Model Number | DDCGP Series |
Max. Input power | Max. 15~160kW Max. Input current 23~220A |
Input voltage | Three-phase 340~420V, 50/60HZ |
Oscillation frequency | 5KHZ~20KHz |
Request of cooling water | Pressure≥ 0.2~0.3Mpa, Flow rate≥ 6~20L/min |
Temperature of cooling water | Water Temperature≤ 45º C |
this is the quenching machine for the induction heating mahcine quenching demands it could be best suitable for the quenching
it is the hot forging machine demands for the induction quenching mahcine use
Heat Treatment like annealing, normalizing, hardening/quenching, tempering.
1. Hardware and tools, such as plier, wrench, hammer, ax, screwing tools and shear (orchard shear).
2. Automobile and motorcycle fittings, such as crankshaft, connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft, semi drive shaft, small shaft and fork.
3. Electric tools, such as gear and axes.
this is for the quenching working demands about the induction hot forging machine demands it could be best suitable for the induction hot quenching machine working demands .
4. Machine tools, such as lathe deck and guide rail.
5. Various hardware metal parts and machined parts, such as big shaft, gear (chain wheel), camshaft, chuck and clamp etc.
6. Hardware molds, such as small-size mold, mold accessory and inner hole of mold.
7. Other metal products.
Model | DDCGP-40 | |
Rated input voltage | Single phase 380V 50-60HZ | |
Rated input current | 50A | |
Maximum oscillating power | 40KW | |
Outpit oscilling power | 50KHZ-250KHZ | |
Duty cycle | intermittent | |
Working considetions | Output power 10%-100% adjustable | |
Cooling method | Cooling water temperature <45℃ | |
Cooling water flow | ≥0.2Mpa | |
Weight (kg) | 50 | kg |
Volume (cm) | 68*39*57 | cm |
this is the technology for the induction quenching machine it could be best suitable for the induction hot quenching machine
this is the packing for the nduction hot forging machine demands it could be best suitable for the induction quenching machine demands
FAST CONTACT:
skype: qian_yi89
tel: 86-18818707653