Manual PPG thickness measurement equipment
PPG-2153M
（The same pressure is measured for thickness）
1. Introduction
This equipment is suitable for the thickness measurement of lithium batteries, but also can measure other non-battery type of thin products, using weight counterweight, to ensure that the test pressure 400-800g adjustable.
2. Operating steps
2.1 Put the battery into the test platform of the thickness measuring machine;
2.2 Lift the test pressure plate, so that the test pressure plate naturally presses down for testing;
2.3 After the test is completed, lift the test press plate;
2.4 Remove the battery until the whole test step is completed.
3. The main accessories of the equipment
3.1. Sensor: Mitutoyo micrometer
3.2. Coating: Spray baking paint.
3.3. Material of parts: steel, grade 00 jinan blue marble.
3.4. Cover material: metal.
4.Technical parameters
S/N | Item | Configration |
1 | Tested effective area | L250mm×W80mm |
2 | Thickness range | 0~30mm |
3 | Height of test | 45mm |
4 | Resolution | 0.001mm |
5 | Single point measurement error | 0.003mm |
6 | Combined measurement error | ≤0.01mm |
7 | Test pressure range | 800g |
8 | Pressure transmission mode | counterweight |
9 | Sensor | Mitutoyo micrometer |
10 | Using the environment | Temperature：23℃±2℃ Humidity：30～80% |
vibration：＜0.002mm/s，＜15Hz | ||
11 | Power | SR44(938882),1.55V |