TP-2700A metal and non-metal samples analyzer
* Long life X-ray tube: metal-ceramic X-ray tube has the characteristics of good heat dissipation, high running power (40kV × 40mA) and long service life;
* High precision goniometer: the diffraction angle drive adopts servo motor drive + optical coding control technology, with accurate positioning and high measurement accuracy;The hidden design of the goniometer makes the performance of the instrument more neat, beautiful and generous. Within the scope of the diffraction angle measurement, the diffraction angle is less than 0.02 ° linearity;
* It can work with temperatureattachment, multifunctional sample holder and other XRD accessories friendly, it can "plug and play". The software automatic identification control technology, convenient for the use of the instrument operators.
* X-ray protection is safe and reliable: X-ray scatterer protection device is safe and reliable, the X-ray protection door is automatically forbidden to open when XRD is measuring sample, double protection can prevent the operator from being exposed to scattering radiation under any circumstances.
* Rated power： 3 kW (HF,HV control technology)
* Tube voltage： 10~60kV, 1kV/step;
* Tube current： 5~50mA, 1mA/step;
* Stability of tube voltage and tube current：≤0.005% ;
* There is Protection for over voltage, over current and over power and water depletion.
* X-ray tube：metal ceramic x-ray tube / Cu Target / Focus size: 1×10mm²/ 2.4kW .
High Precision Goniometer Unit
* Goniometer：Adopt servo motor and optical coding technique to drive θs and θd;
* Scanning mode：θ—θ goniometer; it is vertical; the sample is put horizontally ;
* 2θmeasuring range：-6°~160°; Radius of goniometer: 225mm;
* Scanning mode: continuous, stepping and Omg;
* Minimum step width Angle：0001˚;
* Angle accuracy：≤0.001˚; Angle repeatability：≤0.0001˚ .
* It can cancel the idle running and do angle calibration automatically.
* Angle locating speed：1500˚/min;
* Diffraction Angle linearity: the Angle deviation of all peaks within the full spectrum shall not exceed ±0.02°.
Detector Unit
Closed proportional Detector
* Spectral resolution: ＜25% （Cu Kαspectral line）;
* Maximum linear count rate: ＞ 5×105cps
* Windows 10operating system;
* Qualitative and quantitative analysis of material phases , Kα1 ,α2 peeling, Full spectrum fitting, peak fitting, FWHMand grain size calculation, crystal cell measuring, second kind stress calculation, diffraction line indexation, multiple plotting, 3D plotting, diffraction data calibration, background subtraction, quantitative analysis without standards, full spectral image fitting (WPF), XRD diffraction image simulation, etc.
Working condition
* Environmenttemperature:20±5℃;
* Relative Humidity:30% ~ 80%;
* Power supply:3 phases,380V,50 Hz (If user′s is different, please inform),single phase power≥30 a
* Ground resistance≤4Ω;
* There should be no high frequency and arc interference caused by thetool, welding machine, high frequency furnace and other equipment.
* Cooling water quality shall meet the requirements of X-ray tube;
* The surrounding environment should not be flammable, corrosive gases, dust and vibration.
1.1.Fully Automatic Karl Fischer Water Content Tester
TP-2100
2.Digital Karl Fischer Water Content Tester TP-6A
3.Kinematic Viscosity Tester VST-2000
4.Kinematic Viscosity Tester TPV-8
5.Kinematic Viscosity Tester VST-3000
6.Fully Automatic Oil Acidity Tester (6 cups) ACD-3000I
7.Fully Automatic Surface/Interface Tension Tester IT-800
8.Automatic Surface/Interface Tension Tester (Platinum Plate Method) IT-800P
9.Fully Automatic Open Cup Flash Point Tester TPO-3000
10.Fully Automatic Closed Cup Flash Point Tester TPC-3000
11.Digital Open Cup Flash Point Tester TPO-100
12.Digital Closed Cup Flash Point Tester TPC-100
13.Cloud Point & Pour Point Tester PT-2000
MOQ | 1 Set |
Trade Terms | EXW, FOB, CIF, CFR |
Payment Terms | T/T, L/C |
Port of Loading | Any Port of China |
Packing Method | Internaional Standard Wooden Case |
Transportation Method | By Sea, By Land, By Air, By Express |
Supply Capability | 100 Sets/Month |
* The warranty period is 24 months from commissioning acceptance date on. After the warranty period is over we provide lifelong maintenance and technical service.
* We guarantee the maintenance time no more than 3 working days and response time within 1 hour.
* We build instrument service profile for our clients to record the product service and maintenance conditions.
* After instruments start service, we will pay follow-ups to collect the service conditions.
Chongqing TOP Oil Purifier Co., Ltd
Located at Chongqing city--a southwest electromechanical manufacturing center as well as national municipality, Chongqing TOP is a professional leading manufacturer and supplier of oil purifiers and various related testers. Our company consists of departments respectively for technological development, machinery manufacture, instrument manufacture and quality control etc.
Welcome to visit our website, welcome your inquiry.
CHONGQING TOP OIL PURIFIER CO.,LTD
Manufacture oil purifiers and supply test equipment.
Add: No. 1, Jianlong N. Rd., Jiulongpo District, Chongqing, China
E: sales7@topoilpurifier.com
Cell: 0086-13340266216 (Whatsapp/Wechat) | Skype: topoilpurifier
Tel: 0086-23-88901306 | Fax: 0086-23-88901306
www.topoilpurifier.com; www.toptester.com.cn