Products Specifications
150mm plastic cube mould
Standards: JG237-2008
The 150mm plastic cube mould is used to make specimen for concrete compressive test.
Technical specifications
Internal Size: 150×150×150mm
Working temperature: -35-100 degree C
Internal surface Roughness: Ra<3.2um
Internal size accuracy: 150±0.3mm
Angle accuracy: <0.2degree
Flatness: <0.04mm per 100mm
Adjacent plane verticality: <0.5mm per 100mm
Structure: unibody
Material: Engineering plastic with heat expansion coefficient <50*10-6/℃
Advantages of plastic moulds
Much lighter in weight compared to the iron mould, lower the working strength, lower in transportation cost
No need mould install and mould removal because it’s a whole, can use air pump to demould, higher in work efficiency
Higher in size accuracy
No temperature deformation within -30~+100 degree C.
Test Moulds specifications (plastic & iron)
Mould | Form type | L(mm) | W(mm) | D(mm) |
Cement mortar mould | 3-gang | 160±0.8 | 39.98±0.08 | 40.05±0.05 |
Cement mortar abrasive mould | Single gang | 150±0.05 | 150±0.05 | 30±0.05 |
Mortar mould | 3-gang | 70.7±0.05 | 70.7±0.05 | 70.7±0.05 |
Concrete compression mould | Single | 100±0.2 | 100±0.2 | 100±0.2 |
Single | 150±0.3 | 150±0.3 | 150±0.3 | |
Single | 200±0.4 | 200±0.4 | 200±0.4 | |
Concrete bending test mould | Single | 400±0.8 | 100±0.2 | 100±0.2 |
Single | 550±1.0 | 150±0.3 | 150±0.3 | |
Single | 600±1.0 | 150±0.3 | 150±0.3 | |
Concrete split tension mould | Single | 100±0.2 | 100±0.2 | 100±0.2 |
Single | 150±0.3 | 150±0.3 | 150±0.3 | |
Concrete axial compression mould | Single | 300±0.6 | 100±0.2 | 100±0.2 |
Single | 300±0.6 | 150±0.3 | 150±0.3 | |
Single | 300±0.6 | 200±0.4 | 200±0.4 | |
Concrete axial tension mould | Single | 550±1.0 | 100±0.2 | 100±0.2 |
Concrete compression & elastic modulus mould | Single | 300±0.6 | 100±0.2 | 100±0.2 |
Single | 300±0.6 | 150±0.3 | 150±0.3 | |
Single | 300±0.6 | 200±0.4 | 200±0.4 | |
Concrete bending elastic modulus mould | Single | 550±1.0 | 150±0.3 | 150±0.3 |
Concrete abrasive mould | Single | 150±0.3 | 150±0.3 | 150±0.3 |
Mould | Upper internal diameter | Lower internal diameter | Height |
Concrete impervious mould | 175±0.35 | 185±0.37 | 150±0.30 |
150±0.3 | 150±0.3 | 150±0.3 |
Mould | Internal surface flatness(per 100mm) | Two adjacent plane verticality (per 100mm) | Two opposite plane parallelism (per 100mm) |
Cement mortar mould | 0.03 | 0.20 | -- |
Cement mortar abrasive mould | 0.03 | -- | 0.02 |
Cement mortar mould | 0.04 | 0.50 | 0.05 |
Concrete compression, concrete axial compression mould, concrete compression elastic modulus mould | 0.04 | 0.50 | -- |
Concrete bending test mould, concrete bending elastic modulus mould | -- | 0.50 |
Hot Tags: 150mm plastic cube mould, manufacturers, suppliers, factory, price, buy, for sale
