SITAN STGY89-200D Array induction logging tool is based on the principle of electromagnetic induction to measure the resistivity of the formation. SITAN STGY89-200D array induction tool can obtain 3 kinds of vertical resolution curves, 6 different investigation depth resistivity curves and 6 investigation different depth real resistivity curves, which can evaluate spatial distribution of resistivity, mud invasion, reservoir fluid type, division of oil, gas and water interface, can also calculate water saturation and improve the accuracy of logging interpretation. The logging data of array induction tool are of great significance for the search of thin reservoirs and the discovery of low resistivity reservoirs.
Features:
1. Fine debug, the detection range can reach real 2000Ω·m .
2. No need to use iron, you only need to replace the mechanical connector and interface board to connectthe EILOG system.
Model | STGY89-200D |
Max pressure | 140MPa(20,305psi) |
Max temperature | 175℃(347°F) 2h |
O.D | 92mm (3.622in) |
Min hole | 114.3mm (4.5in) |
Max hole | 508mm (20in) |
Logging speed | 30ft/min |
BUS mode | WTS Bus Command/Status: M2 Data: M5. |
Measurement range | 0.1-2000 Ω·m |
Probe depth | 10, 20, 30, 60, 90, 120in |
Vertical Resolution | 1, 2, 4ft |
Measurement Accuracy | ±1ms/m |
Come from: http://en.sitan-china.com For more information, please refer to:http://en.sitan-china.com/products/ground-monitoring/Array-Induction-Tool.html
