JRC ECDIS JAN-7201
Important note : the price on the website is not correct , pls contact us for the price and delivery time , thanks for your understanding.
JAN-7201 Features
Provide a smooth operating environment ensured
by high-speed chart drawing
- Conforming to the latest IMO performance standards with Marine Equipment Directive (MED) certification.
- Ensuring intuitive and easy-to-use display and operation performance reflecting professional user's voices.
- Integrating route editing and route safety checking to support safer route plans.
- Delivered with a software license allowing an expansion tailored to each operational requirement for a wide
variety of optional features. - Providing the J-Marine Cloud service that collectively supports the updating of charts.
- ECDIS type-specific training (TST) is provided by a variety of organizations around the world on behalf of JRC.
-
Mandatory installation of ECDIS
In response to the latest revision of the International Convention for the Safety of Life at Sea (SOLAS), the International Maritime Organization (IMO) enforced the mandatory installation of the ECDIS on oceangoing passenger ships with 500 gross tons or more and tankers and cargo ships with 3,000 gross tons or more in a stepwise manner in and after July 2012. This mandatory decision requires conventional paper charts or an additional ECDIS as a backup to the primary ECDIS if a ship uses the primary ECDIS as main navigational equipment. (Requirements for the equipment and operation qualification are subject to approval from the country with which the ship is registered and recommendations from the classification society of the ship.)
Regulations and major specifications
This equipment conforms to the requirements set out in the IMO's resolution MSC.191 (79) for display-related voyage information adopted in December 2004 and the IMO Resolution MSC.232 (82) for ECDIS performance standards adopted in December 2006.
Other specifications of the ECDIS are shown below.- Electronic chart display function/Radar overlay function : IEC 61174
- Display-related voyage information : IEC 62288
- Track control system (TCS) function *1 : IEC 62065
- Sophisticated user interface
The JAN-9201/7201 incorporates a new user interface (named jGUI) for an intuitive, easy-to-use, simple menu system based on the display of icons. This interface always displays critical data in fixed positions on the screen while icon-based menu display informs users of corresponding functions straightaway. Furthermore, target tracking (TT) and AIS symbols feature pop-up displays while mouseover on the target showing their main data at a glance.
Easy-to-use operating unit
The newly designed trackball supports all the operation of the equipment. Users will be alerted with alarms from the operating unit and color changes under situations that require attention.
Optional keyboard
The ECDIS will be operable like conventional models by connecting an optional operating unit that incorporates dedicated function buttons, control knobs and a full keyboard adopting the QWERTY layout.
Route editing and safety checking
JRC's new ECDIS model JAN-9201/7201 has integrated route editing, which was conventionally divided into two segments, i.e., graphics input and numeric table input areas, into one. Waypoints, if specified, on a navigational chart are immediately quantified and added to the numeric editing table, and the numeric data on the waypoints that is input into the editing table is immediately reflected on the navigational chart. Up to four routes can be edited at the same time, and a portion cut out of any route can be combined and the routes can be all or partly replaced or edited.
Furthermore, a safety check on edited route data is possible with a click of a button. Detected error information items, if any, are listed and displayed, and the corresponding route portions are highlighted in the chart and table, which can be confirmed at a glance to take remedial measures.Function
Functional expansion
The equipment incorporates a variety of optional functions that will be available with software licenses added. Software licenses can be added before or after the radar comes into operation. Therefore, the radar can be customized to match the actual operating conditions.
Optional functions
- Expansion of AIS display targets (500 → 1000)
- Radar overlay function*1
- TCS support*2
- S-Joy control support*3
*1 : The radar overlay function requires an optional radar interface circuit and radar image signal input.
*2 : The track control system (TCS) function requires auto pilot connections in addition. For details, including corresponding models, contact your JRC representative.
*3 : For autopilot models connectable to the S-Joy control panel, contact your JRC representative.Correspond to the major chart
The JAN-9201/7201 supports the display of major electronic navigational charts (ENCs), including those provided by ADMIRALTY Vector Chart Service (AVCS) (S-57 Ed 3.0/3.1 and S-63), NAVTOR ENC Service, and C-MAP ADMIRALTY ENC Service as well as ADMIRALTY Raster Chart Service (ARCS). Also, it supports advanced features provided with ENCs, such as the Admiralty Information Overlay (AIO) of AVCS by the United Kingdom Hydrographic Office (UKHO) and Dynamic Licensing of Jeppesen ENC service.
ENC (S-57 and S-63 vector charts)
- AVCS (AIO supported)
- NAVTOR ENC Service (PAYS supported)
- C-MAP ADMIRALTY ENC Service*4
(Dynamic Licensing supported)
Raster charts
- ARCS
Others (private charts) - C-MAP Professional+*4
Satellite transmission blocking area display*5
The equipment offers a function for confirming areas where JRC INMARSAT FBB and INMARSAT GX*6 equipment cannot communicate with satellites. The equipment can display satellite antenna reception levels, blocking conditions, and transmission suspension*7. When connections with antennas are lost, this function can be used to check whether it is a temporary transmission outage or it is caused by a device malfunction. When performing route planning, this function makes it possible to confirm in advance if there are any parts of the route where satellite communication is not possible and to avoid losing contact.
In the box
- Central control unit
- Power supply unit
- Display unit
- Trackball operation unit
Options
- Keyboard operation unit
- Sensor LAN switch
- Junction box
- Serial LAN interface circuit
- Analog option circuit
- Gyro interface circuits
- Radar interface circuit
- Relay terminal block
- Display unit mount kit
- Interswitch (4 ch/8 ch)
- eToken*12
Sophisticated user interface
The Electronic Chart Display and Information System (ECDIS) is a geographic information system for voyage planning and route monitoring to support the safety navigation of ships at sea.
The ECDIS onboard a ship uses images obtained from the automatic identification system (AIS), radar system, and collision avoidance target tracking (TT) system and superposes the images with navigational chart information, thus accurately displaying dynamic information on other ships around. Also the ECDIS plays central roles in the safe navigation of the ship and provides safety functions, including the generation of warnings when the ship approaches dangerous areas. The ECDIS is useful for marine accident avoidance and serves as equipment indispensable to the safe navigation of ships.
Specification for JAN-7201
| Model | JAN-7201(19-inch model) |
| Conforming to IMO standards | √ |
| Display unit | 19-inch WUXGA color LCD, 1280 × 1024 pixels, touch panel (sold separately) |
| Central control block | Intel Core i5 2515E 2.5 GHz 2-GB main memory SSD × 2 DVD drive × 1 |
| Power supply | 24 V DC or single-phase 100 to 115V AC or 220 to 240 V AC at 50/60 Hz |
| Power consumption | Rating JAN-9201: 240 VA max.; JAN-7201: 200 VA max. |
JAN-7201 Dimension
Our package is very firmly ,which is suitable for long-distance sea transportation and various types of weather conditions.
1. Fast response ,any Inquiries will be replied within 24 hours.
2. Quality guaranteed :brand product is original and brand new.
3. OEM/ODM available for some Chinese products:
Strong product customization ability, professional customized production line, to provide achievable product solutions.
4.Rich Experience : We do not over promise we over-deliver our promise.
5. Complete models, one stop shopping.
6.Be honestly in business : Honesty is the foundation of human life and the foundation of career.
7.After Sale Service:
1).All products will have been strictly Quality Checked in house before pecking.
2).All products will be well packed before shipping.
3).All our products have 1 year warranty, and we sure the product will be free from maintenance within warranty period.
8. Faster delivery:
We have many of the product in stock .
9.Payment:
You can pay for the order via: T/T, Western Union, or through RMB.
10. Shipping
we have strong cooperation with DHL, TNT, UPS, FEDEX, EMS, China Air Post.
You also can choose your own shipping forwarder.
Ouxian specializing in the field of Marine electronic products. Knowing for the feature of high performance and competitive price , along with an impressive service . We keeps pursuing health and long-term business since its very foundation . We welcome any business talk based on mutual trust and respect .Moreover, we are open to any new ideas or comments to develop better products for you .Confidence comes from the quality of our produces has always been demanding.
Our vision
We, Ouxian Company is working in pursuit of excellence and recognition as the leading supplier of marine electronic products.
Our mission
We, Ouxian Company shall deliver excellent value and contribute to a bright future for people, society and the world through reliable service and creativity .
QR code for Wechat and WhatsApp
1. How about the Delivery time?
If product in stock , we can ship immediately .
If out of stock ,Subject to the sales offer .
2.How about your payment .
If product is in stock , pls pay 100% T/T in advance .
If product is out of stock , pls pay 30% T/T in advance, 70% before shipment .
3. What kind of payments do we support?
T/T, L/C, Western Union & Cash are accepted.
4. Do you charge for the samples for OEM product?
According to our company policy, we just charge the samples based on EXW price. And we will return the samples fee during the next order.
5. Can you produce according to customers' design?
OEM and ODM are both available for made in China product .
6. Can you tell me your main customers?
That's our customer’s privacy, we should protect their information.
At the same time, please rest assured that your information is also safe here.
We'll offer you the quotation as soon as possible once receive your inquiry, so don't hesitate to contact us.
