High speed flexo printing machine
1. PLC and Auto Tension
2. Frequency Inverter
3.Ceramic Anilox Roller
4. High Print Quality
Machine Description:
1. Flexographic Printing Press adopts programmed control system and meter counter. One working length is setup on the control panel, after got to the setup data, the machine will automatically stop and alarm.
2. Flexographic Printing Press adopts famous brand from Japan frequency inverter to control AC motor with stable function.
3. Flexographic Printing Press adopts pneumatic lifting system for printing cylinder.
4. Start in lower speed and full loading. When lifting or reducing speed, the tension is stable, and low noise
5. Ceramic Anilox roller with the material has a full touch when in high speed. It has an advantage of high registration and stereo perception.
6. Flexographic Printing Press adopts special oblique gear and printing size is in high precision.
7. The transmission roller is from Taiwan, it has balance treated and smooth run.
8. Flexographic Printing Press adopts recycle air system which is made up of air blower, air sucker and thermal heater, and it adopts automatic temperature section control. And the cooler is available.
9. Flexographic Printing Press adopts hot air blower and cold air blower for fast ink drying simultaneously.
10. Each printing unit has a clutch and seperate registration system with easy operation.
11. Flexographic Printing Machine adopts EPC for material edge tracking to achieve a good smooth rewinding.
12. Flexographic Printing Press adopts double position unwinding/rewinding stand to realize non-stop exchange.
Usage:
It is suitable for printing such packing materials as polyethylene, polypropylene bag, cellophane and paper in roll, etc. It is a kind of ideal printing equipment for producing paper packing bag for food, supermarket handbag, vest bag and clothes bag, etc.
It's quite commonly used for small order quantity printing service.
Performance and Features
1. Easy operation, flexible starting, accurate color register.
2. The meter counter can set printing quantity according to the requirements. Stop the machine automatically at the quantity
or when the material is cut off.
3. Pneumatic printing cylinder lift and lower, it will stir the printing ink automatically after lifting.
4. The printing ink is spread by the anilox cylinder with even ink color.
5. Reliable drying system coordinated with high-speed rotation, it will automatically break circuit when the machine stops.
6. 360°continuous and adjustable longitudinal register device.
7. The frequency control of motor speed adapts to different printing speeds.
8. There are Jogging/Stopping buttons on the plate roller base and material rolling rack so as to make it easy operate the machine when the plate is installed.
Main Technical Parameter:
Printing width Item |
600mm |
800mm |
1000mm |
1200mm |
1400mm |
1600mm |
1800mm |
2000mm |
|||||||
Printing color |
4 colors,6 colors,8 colors Can do positive and negative both sides printing(6+0;5+1;4+2;3+3) |
||||||||||||||
Printing length |
191-914mm |
||||||||||||||
Printing plate lifting system |
Pneumatic/Hydraulic press control |
||||||||||||||
Printing speed |
80-100m/min |
||||||||||||||
Anilox cylinder |
Metal 10DK-120DK(Germany) |
||||||||||||||
Register precision |
Longitude:±0.25mm Transverse:±0.25mm |
||||||||||||||
Rewinder/Unwinder Diameter |
ø 600mm |
||||||||||||||
Master motor |
3.7KW |
3.7KW |
5.5KW |
5.5KW |
7.5KW |
7.5KW |
11KW |
11KW |
|||||||
Unwinder motor |
1.1 KW |
1.5 KW |
2.2 KW |
3.0 KW |
|||||||||||
Rewinder motor |
1.5 KW |
2.2 KW |
3.0 KW |
3.7KW |
|||||||||||
Electrical header |
14KW |
16KW |
20KW |
22KW |
24KW |
26KW |
28KW |
30KW |
|||||||
Blower of header |
1.5KW×2 |
1.1KW×3 |
1.1KW×3 |
1.1KW×3 |
1.5KW×3 |
1.5Kw×3 |
2.2KW×3 |
2.2KW×3 |
|||||||
Blower of nature wind |
0.75 KW |
0.75 KW |
1.1 KW |
1.1 KW |
1.1 KW |
1.5KW |
1.5KW |
1.5KW |
|||||||
Inking motor |
750W |
750W |
750W |
750W |
750W |
750W |
750W |
750W |
|||||||
Master frequency converter |
Panasonic/ Toshi batransducer Japan |
||||||||||||||
Bearing |
Japan(NSK) |
||||||||||||||
Unilateral bearing |
ASNU (Germany) |
||||||||||||||
Weight |
4500Kg |
4750Kg |
56000Kg |
5250 Kg |
5500Kg |
5750Kg |
6000Kg |
6300 Kg |
|||||||
Master power |
25KW |
27KW |
34KW |
37KW |
43KW |
47KW |
55KW |
58KW |
|||||||
Dimension (L×W×H) |
4.8m |
4.8m |
4.8m |
4.8m |
4.8m |
4.8m |
4.8m |
4.8m
|