CW6280x4000 horizontal lathe machine
Machine Features:
l Standard spindle head: C11/D11, spindle bore Φ100/105mm,
l Optional spindle head: D11,spindle boreΦ130mm.
l Guide rail width:550mm
l Guide rail hardness:HRC50,Depth1.5mm
l Max load weight between 2-centers:1000kg;
With steady rest: up to 2000kg;
l Standard: Left-hand wheel is equipped;
Right-handed wheel shall be informed specially when placing order;
l Equipped with hydraulic clutch and electrical cabinet
l Slide board boxes with vertical and horizontal rapid shift handle included;
l Special indication is required iftailstock sleeve is with a scale;
Specifications | Unit | Parameter |
Max. swing over bed | mm | 800 |
Max. swing over carriage | mm | 520 |
Center distance | mm | 4000 |
Width of gap | mm | 320 |
Swing over gap | mm | 1000 |
Width of guide way | mm | 550 |
Spindle bore diameter | mm | 105 |
spindle nose |
| C11/D11 |
Spindle speed | rpm | (18 speeds) 7.5~1000 |
Longitudinal feed | mm/r | (64) 0.1~24.3 |
Cross feed | mm/r | (64) 0.05~12.15 |
Rapid traverse speed | m/min | 3.8 |
Metric thread | mm | (39)1~240 |
Inch thread | TPI | (26) 14~1 |
Module thread | mm | (53) 0.5~120 |
Diametrical pitch thread | D.P | (24) 28~1 |
Max. travel of cross slide | mm | 493 |
Travel of top slide | mm | 200 |
Main motor power | kW | 11 |
Rapid traverse motor power | kW | 1.1 |
Coolant pump motor power | kW | 0.09 |
Wooden box/Pallet packing | mm |
|
Gross/Net weight | kg |
|
Name | Size(mm) |
3-jaw chuck | Φ400(For CW6280E) |
4-jaw chuck | Φ630(For CW6280E) |
Steady rest | Φ40~Φ250(For CW6280Ev |
Follow rest | Φ20~Φ100(For CW6280E) |
Dead center | 2 sets |
Reducing sleeve | 1 set |
Oil gun | 1 set |
Wrench Tool | 1 set |
Instruction Manual | 1 set |
Certificate of Conformity | 1 set |
Packing List | 1 set |
