CW6280E horizontal gap lathe machine
Such horizontal gap lathe machine has following features:
l Standard spindle head: C11, spindle bore Φ100mm,
Optional spindle head: D11,spindle bore Φ130mm;
l Guide rail width:550mm
l Guide rail hardness:HRC50,Depth1.5mm
l Max load weight between 2-centers:1000kg;
With steady rest: up to 2000kg;
l Standard: Left-hand wheel is equipped;
Right-handed wheel shall be informed specially when placing order;
l Equipped with hydraulic clutch and electrical cabinet;
l Slide board boxes with vertical and horizontal rapid shift handle included;
l Special indication is required iftailstock sleeve is with a scale;
Specifications | Unit | Parameter | Parameter | Parameter | Parameter | Parameter | Parameter |
Max. swing over bed | mm | 800 | 800 | 800 | 800 | 800 | 800 |
Max. swing over carriage | mm | 520 | 520 | 520 | 520 | 520 | 520 |
Center distance | mm | 750/1000 | 1500/2000 | 3000 | 4000 | 5000 | 6000 |
Width of gap | mm | 320 | 320 | 320 | 320 | 320 | 320 |
Swing over gap | mm | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 |
Width of guide way | mm | 550 | 550 | 550 | 550 | 550 | 550 |
Spindle bore diameter | mm | 105 | 105 | 105 | 105 | 105 | 105 |
spindle nose |
| C11/D11 | C11/D11 | C11/D11 | C11/D11 | C11/D11 | C11/D11 |
Spindle speed | rpm | (18 speeds) 7.5~1000 | (18 speeds) 7.5~1000 | (18 speeds) 7.5~1000 | (18 speeds) 7.5~1000 | (18 speeds) 7.5~1000 | (18 speeds) 7.5~1000 |
Longitudinal feed | mm/r | (64) 0.1~24.3 | (64) 0.1~24.3 | (64) 0.1~24.3 | (64) 0.1~24.3 | (64) 0.1~24.3 | (64) 0.1~24.3 |
Cross feed | mm/r | (64) 0.05~12.15 | (64) 0.05~12.15 | (64) 0.05~12.15 | (64) 0.05~12.15 | (64) 0.05~12.15 | (64) 0.05~12.15 |
Rapid traverse speed | m/min | 3.8 | 3.8 | 3.8 | 3.8 | 3.8 | 3.8 |
Metric thread | mm | (39)1~240 | (39)1~240 | (39)1~240 | (39)1~240 | (39)1~240 | (39)1~240 |
Inch thread | TPI | (26) 14~1 | (26) 14~1 | (26) 14~1 | (26) 14~1 | (26) 14~1 | (26) 14~1 |
Module thread | mm | (53) 0.5~120 | (53) 0.5~120 | (53) 0.5~120 | (53) 0.5~120 | (53) 0.5~120 | (53) 0.5~120 |
Diametrical pitch thread | D.P | (24) 28~1 | (24) 28~1 | (24) 28~1 | (24) 28~1 | (24) 28~1 | (24) 28~1 |
Max. travel of cross slide | mm | 493 | 493 | 493 | 493 | 493 | 493 |
Travel of top slide | mm | 200 | 200 | 200 | 200 | 200 | 200 |
Main motor power | kW | 11 | 11 | 11 | 11 | 11 | 11 |
Rapid traverse motor power | kW | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 |
Coolant pump motor power | kW | 0.09 | 0.09 | 0.09 | 0.09 | 0.09 | 0.09 |
Wooden box/Pallet packing | mm |
|
|
|
|
|
|
Gross/Net weight | kg |
|
|
|
|
|
|
S.N | Name | Remark |
1 | 3-jaw chuck | Φ400 (For CW6280E) |
2 | 4-jaw chuck | Φ630 (For CW6280E) |
3 | Dead center | 2 sets |
4 | Reducing sleeve | 1 set |
5 | Wrench Tool | 1 set |
6 | Oil gun | 1 set |
7 | Foundationbolt | Yes |
8 | Instruction Manual | 1 set |
9 | Certificate of Conformity | 1 set |
10 | Packing List | 1 set |
11 | Manual for Spare Parts | 1 set |
Pls send inquiry to me for optioanl accessories and other further information about such lathe machines.
