CDE6240 conventional horizontal lathe/tornos conventional
1. CDE-A series horizontal lathe features mature construction, a wide range of spindle speed;
2. and it is suitable for job shops with small volume production and machinery maintenance shops;
3. The lathe can perform turning applications on I.D& O.D cylindrical surface, conical surface, end face, and also is capable of grooving, chamfering ,drilling, reaming, tapping and oil grooving.
4. Different metric, imperial, module, diametral and circular pitch threads can be produced on this lathes, too;
5. The tolerance of machined parts in this machine can reach to Class IT7 and the surface roughness goes to Ra1.6.
6. The lathe can be in metric or imperial or combination of metrica and imperial upon request.
7. Carriage wheel can be left-handed or right-handed;
8. Spindle bore diameter can be 100/105mm or 130mm optional;
9. DRO is available, too.
10. Kinds of lathe colors are availbe for customers' choice;
Specifications | Unit | CDE6240Ax750/1000/1500 | CDE6240Ax2000 | CDE6240Ax3000 |
Max. swing over bed | mm | Φ400 | Φ400 | Φ400 |
Max. swing over carriage | mm | Φ220 | Φ220 | Φ220 |
Max. length of work piece | mm | 750/1000/1500 | 2000 | 3000 |
Max. swing over gap | mm | Φ700 | ||
Width of guide way |
| 394 | 394 | 394 |
Dia. of spindle bore | mm | Φ52 | ||
Taper of center sleeve |
| Morse No.6 | Morse No.6 | Morse No.6 |
Spindle speed | rpm | 11~1400/22 | ||
Longitudinal feed | mm/rev | 0.035~2.842 | 0.035~2.842 | 0.035~2.842 |
Cross feed | mm/rev | 0.009~0.804 | ||
Metric thread |
| 0.5~240(66) | 0.5~240(66) | 0.5~240(66) |
Whitemouth thread |
| 80~1/4(49)tpi | ||
Module thread | mm | 0.25~120(57) | 0.25~120(57) | 0.25~120(57) |
Diametrical pitch thread | mm | 160~7~16DP(50) | ||
Section of tool shank | mm | 25×25 | 25×25 | 25×25 |
Travel of top slide | mm | 150 | ||
Max. travel of cross slide | mm | 348 | 348 | 348 |
Pitch of longitudinal lead screw | mm | 12 | 12 | 12 |
Travel of tailstock center sleeve | mm | 150 | 150 | 150 |
Diameter of tailstock center sleeve | mm | Φ75 | Φ75 | Φ75 |
Taper of tailstock center sleeve | Morse | No.5 | No.5 | No.5 |
Main motor power | kW | 7.5(50Hz)/5.5 (60Hz) | ||
Wooden case | mm | 270x115x190 295x115x190 345x115x190 | 395x115x190
| 495x115x190 |
Gross/net weight | kg | 2670/1970 2715/2020 2805/2070 | 2895/2180
| 3095/2380 |
S.N | Name | Size |
1 | 3-jaw chuck | Φ250 mm K11250C/C6(For CDE6240A) |
2 | Steady rest | Φ30~Φ160(For CDE6240A) |
3 | Follow rest | Φ20~Φ80(For CDE6240A) |
4 | V-belt | B2210 (For CDE6240A 50HZ) |
5 | V-belt | B2261 (For CDE6240A 60HZ) |
6 | Dead Center | D115, DB1221 |
7 | Oil gun | 1 set |
8 | Wrench tool | 1 set |
9 | Foundation bolt | 1 set |
10 | Key | MS705-2 used for door of belt cover |
11 | Keys | used for door of electrical cabinet |
12 | Instruction Manual | 1 set |
Pls send inquiry to me for optioanl accessories and other further information about conventional horizontal lathe/tornos conventional.
