CDE6240x750 horizontal lathe machine
CDS6256(Ø560mm) Hot-sale Conventional Horizontal Lathe
CW6280Ex3000(Ø800mm) Widely-used Conventional Horizontal Lathe Machine
It can machine inner circle, outer circle, and end and head surface, taper surface;
Gap lathe can process the deformation parts;
Function is including the drilling and reaming;
Threads cutting: Metric, inch, diametrical pitch, module thread;
Such conventional metal lathe machine has following features:
- Spindle nose: C6-type (No D-type spindle nose)
- Chucktype: Direct-coupled;
- New improved direct-coupled 3-jaw, 4-jaw chuck;
- Guide rail width: 394mm;
- Guide rail hardness: HRC50,Depth 1.5mm
- Max load capacity between two centers: 500kg;
- Provide left and right wheel,
- Apron with rapid shift handle in longitudinal and cross direction;
- Special indication is required iftailstock sleeve is with a scale;
- Mechanical clutch is used for such lathe. No foot brake, No electrical cabinet;
- The precision can reach up to IT7 level; the surface roughness can be up to 1.6 grade;
Specifications | Unit | Parameter of cde6240 horizontal lathe |
Max. swing over bed | mm | Φ400 |
Max. swing over carriage | mm | Φ220 |
Max. length of work piece | mm | 750 |
Max. swing over gap | mm | Φ700 |
Width of guide way | mm | 394 |
Dia. of spindle bore | mm | Φ52 |
Taper of center sleeve | rpm | Morse No.6 |
Spindle speed | mm/rev | 11~1400/22 |
Longitudinal feed | mm/rev | 0.035~2.842 |
Cross feed | mm/rev | 0.009~0.804 |
Metric thread | mm | 0.5~240(66) |
Whitemouth thread | tpi | 80~1/4(49) |
Module thread |
| 0.25~120(57) |
Diametrical pitch thread | DP | 160~7~16 (50) |
Section of tool shank | mm | 25×25 |
Travel of top slide | mm | 150 |
Max. travel of cross slide | mm | 348 |
Pitch of longitudinal lead screw | mm | 12 |
Travel of tailstock center sleeve | mm | 150 |
Diameter of tailstock center sleeve | mm | Φ75 |
Taper of tailstock center sleeve | Morse | No.5 |
Main motor power | kW | 7.5(50Hz)/5.5 (60Hz) |
Wooden case/Steel pallet | mm | 2740/2580×1150×1900 |
Gross/net weight | Kg | 2670/1970 |
S.N | Name | Remark |
1 | 3-jaw chuck | Φ250 mm K11250C/C6 |
2 | V-belt | B2210 (For CDE6240A 50HZ) |
3 | V-belt | B2261 (For CDE6240A 60HZ) |
4 | Dead center | D115, DB1221 |
5 | Oil gun | 1 set |
6 | Wrench tool | 1 set |
7 | Foundation bolt | 1 set |
10 | Instruction Manual in English | 1 set |
11 | Certificate of Conformity | 1 set |
12 | Packing List | 1 set |
Pls send inquiry to me for optioanl accessories and other further information about such lathe machines.
