CDE6240x1000 metal lathe machine
CW6280Ex3000(Ø800mm) Hot-sale Conventional Horizontal Lathe
Such manual horizontal metal lathe machine has following features:
Spindle nose: C6-type (No D-type spindle nose)
Chucktype: Direct-coupled;
New improved direct-coupled 3-jaw, 4-jaw chuck;
Guide rail width: 394mm;
Guide rail hardness: HRC50,Depth 1.5mm
Max load capacity between two centers: 500kg;
Provide left and right wheel,
Apron with rapid shift handle in longitudinal and cross direction;
Special indication is required iftailstock sleeve is with a scale;
Mechanical clutch is used for such lathe. No foot brake, No electrical cabinet;
The precision can reach up to IT7 level; the surface roughness can be up to 1.6 grade;
NO CE Certifcate;
Such manual horizontal lathe machine has following usages:
1. It can machine inner circle, outer circle, and end and head surface, taper surface of Steel, cast iron, non-metal material.
2. Its Gap can process the deformation parts.
3. Function is including the drilling and reaming.
4. Metric, inch, diametrical pitch, module thread;
Specifications of c6240 lathe machine tornos | Unit | Parameter |
Max. swing over bed | mm | 400 |
Max. swing over carriage | mm | 220 |
Max. swing over gap | mm | 700 |
Width of guide way | mm | 394 |
Distance between centers | mm | 1000 |
Dia. of spindle bore | mm | 52 |
Taper of center sleeve |
| Morse No.6 |
Spindle speed | rpm | 11~1400/22 |
Longitudinal feed | mm/rev | 0.035~2.842 |
Cross feed | mm/rev | 0.009~0.804 |
Metric thread | mm/rev | 0.5~240(66) |
Inch thread | tpi | 80~1/4(49) |
Module thread |
| 0.25~120(57) |
Diametrical pitch thread | DP | 160~7~16 (50) |
Section of tool shank | mm | 25×25 |
Travel of top slide | mm | 150 |
Max. travel of cross slide | mm | 348 |
Pitch of longitudinal lead screw | mm | 12 |
Travel of tailstock center sleeve | mm | 150 |
Diameter of tailstock center sleeve | mm | 75 |
Taper of tailstock center sleeve | Morse | No.5 |
Main motor power | kW | 7.5(50Hz)/5.5 (60Hz) |
Wooden case/Steel pallet | mm | 2950/2830×1150×1610 |
Gross/net weight | kg | 2715/2020 |
S.N | Name | Remark |
1 | 3-jaw chuck | Φ250 mm K11250C/C6(For CDE6240A) |
2 | V-belt | B2210 (For CDE6240A 50HZ) |
3 | V-belt | B2261 (For CDE6240A 60HZ) |
4 | Dead center | D115, DB1221 |
5 | Oil gun | 1 set |
6 | Wrench tool | 1 set |
7 | Foundation bolt | 1 set |
8 | Key | MS705-2 used for door of belt cover |
9 | Keys | used for door of electrical cabinet |
10 | Instruction Manual | 1 set |
11 | Certificate of Conformity | 1 set |
12 | Packing List | 1 set |
kinds of colors for your choice/can be customized