CDE6240x1500 universal metal cutting lathe machine
1. CDE-A series horizontal lathe features mature construction, a wide range of spindle speed;
2. and it is suitable for job shops with small volume production and machinery maintenance shops;
3. The lathe can perform turning applications on I.D& O.D cylindrical surface, conical surface, end face, and also is capable of grooving, chamfering ,drilling, reaming, tapping and oil grooving.
4. Different metric, imperial, module, diametral and circular pitch threads can be produced on this lathes, too;
5. The tolerance of machined parts in this machine can reach to Class IT7 and the surface roughness goes to Ra1.6.
6. The lathe can be in metric or imperial or combination of metrica and imperial upon request.
7. Carriage wheel can be left-handed or right-handed;
8. Spindle bore diameter can be 100/105mm or 130mm optional;
9. DRO is available, too.
10. Kinds of lathe colors are availbe for customers' choice;
Spindle nose: C6-type (No D-type spindle nose)
Chucktype: Direct-coupled;
New improved direct-coupled 3-jaw, 4-jaw chuck;
Guide rail width: 394mm;
Guide rail hardness: HRC50,Depth 1.5mm
Max load capacity between two centers: 500kg;
Provide left and right wheel,
Apron with rapid shift handle in longitudinal and cross direction;
Special indication is required iftailstock sleeve is with a scale;
Mechanical clutch is used for such lathe. No foot brake, No electrical cabinet;
The precision can reach up to IT7 level; the surface roughness can be up to 1.6 grade;
Specifications | Unit | Parameter |
Max. swing over bed | mm | Φ400 |
Max. swing over carriage | mm | Φ220 |
Max. length of work piece | mm | 1500 |
Max. swing over gap | mm | Φ700 |
Width of guide way |
| 394 |
Dia. of spindle bore | mm | Φ52 |
Taper of center sleeve |
| Morse No.6 |
Spindle speed | rpm | 11~1400/22 |
Longitudinal feed | mm/rev | 0.035~2.842 |
Cross feed | mm/rev | 0.009~0.804 |
Metric thread |
| 0.5~240(66) |
Whitemouth thread | tpi | 80~1/4(49) |
Module thread | mm | 0.25~120(57) |
Diametrical pitch thread | mm | 160~7~16DP(50) |
Section of tool shank | mm | 25×25 |
Travel of top slide | mm | 150 |
Max. travel of cross slide | mm | 348 |
Pitch of longitudinal lead screw | mm | 12 |
Travel of tailstock center sleeve | mm | 150 |
Diameter of tailstock center sleeve | mm | Φ75 |
Taper of tailstock center sleeve | Morse | No.5 |
Main motor power | kW | 7.5(50Hz)/5.5 (60Hz) |
Wooden case | mm | 3490x1150x1900 |
Gross/net weight | kg | 2905/2170 |
Pls send inquiry to me for optioanl accessories and other further information about such metal lathe machines.
