Such manual lathe machine has following features:
- It can machine inner circle, outer circle, and end and head surface, taper surface;
- Gap lathe can process the deformation parts;
- Function is including the drilling and reaming;
- Metric, inch, diametrical pitch, module thread;
- The bed is made of high-grade cast iron;
- The bed is undergoing surface quenching, the hardness can be HRC50;
- The noise can be under 83(A);
Specifications | Unit | Parameter |
Max. swing over bed | mm | 630 |
Max. swing over carriage | mm | 350 |
Distance between two centers | mm | 2000 |
Width of gap | mm | 320 |
Swing over gap | mm | 800 |
Width of guide way | mm | 550 |
Spindle bore diameter | mm | Φ105 / Φ130 opt |
spindle nose |
| C11/D11 opt |
Spindle speed | rpm | (18 speeds) 7.5~1000 |
Longitudinal feed | mm/r | (64) 0.1~24.3 |
Cross feed | mm/r | (64) 0.05~12.15 |
Rapid traverse speed | m/min | 3.8 |
Metric thread | mm | (39)1~240 |
Inch thread | TPI | (26) 14~1 |
Module thread | mm | (53) 0.5~120 |
Diametrical pitch thread | D.P | (24) 28~1 |
Max. travel of cross slide | mm | 445 |
Travel of top slide | mm | 200 |
Main motor power | kW | 11 |
Rapid traverse motor power | kW | 1.1 |
Coolant pump motor power | kW | 0.09 |
Wooden box Pallet packing | mm | 4560×1150×2080 4480×1100×1920 |
Gross/Net weight | kg | 5650/4150 |
S.N | Name | Remark |
1 | 3-jaw chuck | Φ320 (For CW6263E) |
2 | 4-jaw chuck | Φ500 (For CW6263E) |
3 | Dead center | M6 (2) |
4 | Reducing sleeve | 1 set |
5 | Wrench Tool | Yes |
6 | Oil gun | Yes |
7 | Foundationbolt | Yes |
8 | Certificate of Conformity | 1 set |
9 | Packing List | 1 set |
10 | Instruction Manual | 1 set |
11 | Manual for Spare Parts | 1 set |
