CDS6232x500 manual bench lathe machine
Such bench lathe machine has following features:
CE certified-CE Certificate;
Standard spindle head: C6,
Optional spindle head: D6, spindle bore:52 mm
Guide rail width:280mm
High-frequency quenching Guide rail hardness: HRC50, Depth 1.5mm
Maximum load capacity between two centers:200kg
Standard: the lathe is equipped with left-handed wheel slip board boxes,
Right-handed wheel can also be provided, but shall be informed specially when placing order;
Headstock in the clutch, three boxes all use self inside lubrication;
3-jaw chuck and 4-jaw chuck: Direct coupled type;
Standard: the lathe is equipped with mechanical clutch and mechanical braking
Main motor is double - speed motor, unable to offer dual voltage;
Available voltage frequency: 50HZ: 220V, 380V, 400V, 415V, 420V, 440V, 600V
DRO: optional;
Specifications | Unit | CDS6232x500 bench lathe |
Max swing over bed | mm | 320 |
Max swing over carriage | mm | 180 |
Center distance | mm | 500 |
Max swing in gap | mm | 520 |
Width of bed | mm | 280 |
Range of pitch thread | TPI | 56~2 (52) |
Range of metric thread |
| 0.4~14(40) |
Range of module thread |
| 0.2~3.5(46) |
Range of Whitworth thread | DP | 6~112 (33) |
Taper of tail quill |
| M4 |
Travel of tail quill | mm | 125 |
Diameter of tail quill | mm | 50 |
Power of main motor | kW | 3.3/2.2 |
Power of coolant motor | W | 60 |
Net weight | kg | 1030 |
Gross weight | kg | 1430 |
Overall dimensions(L×W×H) | mm | 1860×935×1200 |
Packing dimensions(L×W×H) | mm | 2080 ×1040 ×1500 |
S.N | Name | Size(mm) |
1 | 3-jaw chuck | Φ200 mm |
2 | Dead centers | M4 M5 Each one |
3 | Center sleeve | yes |
4 | Wrench tool | Yes |
5 | Large protection | Yes |
6 | Oil gun | Yes |
7 | Foundation bolt | Yes |
8 | Foot brake |
|
9 | Instruction Manual | 1 set |
10 | Certificate of Conformity | 1 set |
11 | Packing List | 1 set |
12 | Manual for Spare Parts | 1 set |
Pls send inquiry to me for optioanl accessories and other further information about such bench lathe machines.
Gap lathe is used to cut larger diameter or unusual shaped parts, Metric or imperial leadscrews lathes are available to produce metric, inch, module and diametral pitches upon the customer's requirements, and also accomplish drilling, reaming and oil grooving applications.
Payment Term:
1. 30% down payment, 70% by T/T before shipment;
2. 100% LC at sight(optional and shall be discussed before placing order);
Minimum Order Quantity:
1. 1 Set;
2. ≥2 sets, there will be much discounts.
Warranty:
1. Normally, 12 months for parts as of delivery of the machines;
Shipment:
1. For machine itself, by sea or train(inland countries).
2. For documents, by international express. eg DHL, TNT or EMS.
