CDE6240x3000 horizontal lathe machine
Such horizontal lathe machine has following features:
1. Spindle nose: C6-type (No D-type spindle nose)
2. Chucktype: Direct-coupled;
3. New improved direct-coupled 3-jaw, 4-jaw chuck;
4. Guide rail width: 394mm;
5. Guide rail hardness: HRC50,Depth 1.5mm
6. Max load capacity between two centers: 500kg;
7. Provide left and right wheel,
8. Apron with rapid shift handle in longitudinal and cross direction;
9. Special indication is required iftailstock sleeve is with a scale;
10. Mechanical clutch is used for such lathe. No foot brake, No electrical cabinet;
11. The precision can reach up to IT7 level; the surface roughness can be up to 1.6 grade;
It can machine inner circle, outer circle, and end and head surface, taper surface;
Gap lathe can process the deformation parts;
Function is including the drilling and reaming;
Threads cutting: Metric, inch, diametrical pitch, module thread;
Specifications | Unit | Parameter |
Max. swing over bed | mm | 400 |
Max. swing over carriage | mm | 220 |
Max. swing over gap | mm | 700 |
Width of guide way | mm | 394 |
Dia. of spindle bore | mm | 52 |
Distance between centers | mm | 3000 |
Taper of center sleeve |
| Morse No.6 |
Spindle speed | rpm | 11~1400/22 |
Longitudinal feed | mm/rev | 0.035~2.842 |
Cross feed | mm/rev | 0.009~0.804 |
Metric thread | mm | 0.5~240(66) |
Inch thread | tpi | 80~1/4(49) |
Module thread | mm | 0.25~120(57) |
Diametrical pitch thread | DP | 160~7~16 (50) |
Section of tool shank | mm | 25×25 |
Travel of top slide | mm | 150 |
Max. travel of cross slide | mm | 348 |
Pitch of longitudinal lead screw | mm | 12 |
Travel of tailstock center sleeve | mm | 150 |
Diameter of tailstock center sleeve | mm | 75 |
Taper of tailstock center sleeve | Morse | No.5 |
Main motor power | kW | 7.5(50Hz)/5.5 (60Hz) |
Wooden case/Steel pallet | mm | 4950×1150×1900 4830×1120×1610 |
Gross/net weight | kg | 3095/2380 |
| S.N | Name | Φ250 mm K11250C/C6(For CDE6240A) |
1 | Steady rest | Φ30~Φ160(For CDE6240A) |
2 | Follow rest | Φ20~Φ80(For CDE6240A) |
3 | V-belt | B2210 (For CDE6240A 50HZ) |
4 | V-belt | B2261 (For CDE6240A 60HZ) |
5 | Dead Center | D115, DB1221 |
6 | Oil gun | 1 set |
7 | Wrench tool | 1 set |
8 | Foundation bolt | 1 set |
9 | Key | MS705-2 used for door of belt cover |
10 | Keys | used for door of electrical cabinet |
11 | Instruction Manual | 1 set |
12 | Certificate of Conformity | 1 set |
Pls send inquiry to me for optioanl accessories and other further information about such lathe machines.
