CDL6251x750 conventional bench lathe machine
- CDL6251x750 bench lathe machine has following features:
- Standard: spindle head is C6, Spindle hole: Φ48 mm
- Spindle head is D6, spindle hole: Φ52 mm;
- Guide rail width:300mm;
- Guide rail hardness:HRC50, Depth1.5mm;
- Hardened and ground guide ways;
- Maximum load capacity between two centers: 300kg
- Standard: the lathe is equipped with left-handed wheel;
- Right-handed wheel shall be informed specially when placing order;
- Three boxes are all self inside lubricating;
- Machine tool bed box are non-clutch;
- CE Certificated are not provided;
Specifications | Unit | CDL6241x750 bench lathe machine |
Max swing over bed | mm | 510 |
Max swing over carriage | mm | 320 |
Center distance | mm | 750 |
Max swing in gap | mm | 735 |
Width of bed | mm | 300 |
Spindle nose |
| D8 |
Spindle bore | mm | 82 |
Taper of spindle bore |
| 1:20(F 90) |
Spindle speeds | rpm | 16~1600 (12 speed) |
Range of inch threads | TPI | 2~56 |
Range of metric threads | mm | 0.5~14 |
Range of module threads | mm | 0.5~14 |
Range of Di metrical pitch thread | D.P | 2~56 |
Longitudinal feed | mm/rev | 0.06~0.82 (0.002"~0.032"/r) |
Cross feed | mm/rev | 0.017~0.242 (0.007"~0.0095"/r) |
Lead screw diameter | mm | 36 |
Pitch of lead screw | mm | 6 |
Taper of tailstock quill |
| M4 |
Travel of tailstock quill | mm | 150 |
Diameter of tailstock quill | mm | 60 |
Power of main motor | kW | 5.5 |
Power of coolant motor | W | 90 |
Net weight | kg | 2040 |
Gross weight | kg | 2585 |
WOODEN CASES STEEL PALLET (L×W×H) | mm | 2430×1090×2000 2250×1100×1780 |
Pls send inquiry to me for optioanl accessories and other further information about such bench lathe machines.