CW6280x750 center lathe machine
Such horizontal lathe machine has following features:
l Standard: spindle head: C11/D11, spindle bore diameter: Φ100/105mm.
l Optional: spindle head: D11, spindle bore diameter Φ130mm.
l Guide rail width: 550mm.
l Guide way hardness: HRC50, Depth1.5mm.
l Max load weight between 2-centers: 1000kg; with steady rest: up to 2000kg.
l Standard: Left-hand wheel is equipped;
Right-handed wheel shall be informed specially when placing order.
l Equipped with hydraulic clutch and electrical cabinet.
l Slide board boxes with vertical and horizontal rapid shift handle.
l Special indication is required if tailstock sleeve is with a scale.
Specifications | Unit | CW6280Ex750 horizontal lathe machine |
Max. swing over bed | mm | 800 |
Max. swing over carriage | mm | 520 |
Center distance | mm | 750 |
Width of gap | mm | 320 |
Swing over gap | mm | 1000 |
Width of guide way | mm | 550 |
Spindle bore diameter | mm | 105/130(Opt) |
spindle nose |
| C11/D11 (Opt) |
Spindle speed | rpm | (18 speeds) 7.5~1000 |
Longitudinal feed | mm/r | (64) 0.1~24.3 |
Cross feed | mm/r | (64) 0.05~12.15 |
Rapid traverse speed | m/min | 3.8 |
Metric thread | mm | (39)1~240 |
Inch thread | TPI | (26) 14~1 |
Module thread | mm | (53) 0.5~120 |
Diametrical pitch thread | D.P | (24) 28~1 |
Max. travel of cross slide | mm | 493 |
Travel of top slide | mm | 200 |
Main motor power | kW | 11 |
Rapid traverse motor power | kW | 1.1 |
Coolant pump motor power | kW | 0.09 |
Wooden box Pallet packing | mm | 3490×1150×2080 3390×1100×1920 |
Gross/Net weight | kg | 4450/3550 |
S.N | Name | Remark |
1 | 3-jaw chuck | Φ400 (For CW6280E) |
2 | 4-jaw chuck | Φ630 (For CW6280E) |
3 | Dead center | 2 sets |
4 | Reducing sleeve | 1 set |
5 | Wrench Tool | 1 set |
6 | Oil gun | 1 set |
7 | Foundationbolt | Yes |
8 | Instruction Manual | 1 set |
9 | Certificate of Conformity | 1 set |
10 | Packing List | 1 set |
11 | Manual for Spare Parts | 1 set |