CDL6136x1500 metal lathe machine
CDS6250(Ø500mm) Widely-used Conventional Horizontal Lathe Machine
1. The machine is designed according to the character ergonomics.
2. Spindle is tested by dynamic balance test.
3. Forced lubricating system
4. Guide rail--high frequency quenching
5. It is equipped with fast moving device, which is easy to operate.
Standard: spindle head is C6, Spindle hole: Φ48 mm
Spindle head is D6, spindle hole: Φ52 mm;
Guide rail width:300mm;
Guide rail hardness:HRC50, Depth1.5mm;
Hardened and ground guide ways;
Maximum load capacity between two centers: 300kg
Standard: the lathe is equipped with left-handed wheel;
Right-handed wheel shall be informed specially when placing order;
Three boxes are all self inside lubricating;
Machine tool bed box are non-clutch;
CE Certificate is not provided;
Specifications | Unit | Parameter |
Max swing over bed | mm | 360 |
Max swing over carriage | mm | 180 |
Center distance | mm | 1500 |
Max swing in gap(optional) | mm | 590 |
Width of bed | mm | 300 |
Spindle nose |
| C6/D6 |
Spindle bore | mm | 48/52 |
Taper of spindle bore |
| M6 |
Spindle speeds | rpm | 32~2000(12 speed) |
Range of inch threads | TPI | 2~56 |
Range of metric threads | mm | 0.5~14 |
Range of module threads | mm | 0.5~14 |
Range of Di metrical pitch thread | D.P | 2~56 |
Longitudinal feed | mm/rev | 0.06~0.82 (0.002"-0.032"/r) |
Cross feed | mm/rev | 0.017~0.242 (0.007"~0.0095"/r) |
Lead screw diameter | mm | 36 |
Pitch of lead screw | mm | 6 |
Taper of tailstock quill |
| M4 |
Travel of tailstock quill | mm | 150 |
Diameter of tailstock quill | mm | 60 |
Power of main motor | kW | 3/4.5 (4/6HP) |
Power of coolant motor | W | 90W(0.125HP) |
Net weight | kg | 1593 |
Gross weight | kg | 1893 |
WOODEN CASES STEEL PALLET (L×W×H) | mm | 2980×1090×2000 2850×1100×1780 |
Pls send inquiry to me for optioanl accessories and other further information about such lathe machines.
