CW6263Cx1000 conventional gap lathe/tornos conventional
CW6280Ex3000(Ø800mm) Hot-sale Conventional Lathe Machine
CW62100Ex3000(Ø1000mm) Widely-used Conventional Horizontal Lathe Machine
l Standard: spindle head: C11/D11, spindle bore diameter: Φ100/105mm.
l Optional: spindle head: D11, spindle bore diameter Φ130mm.
l Guide rail width: 550mm.
l Guide way hardness: HRC50, Depth1.5mm.
l Max load weight between 2-centers: 1000kg; with steady rest: up to 2000kg.
l Standard: Left-hand wheel is equipped;
Right-handed wheel shall be informed specially when placing order.
l Equipped with hydraulic clutch and electrical cabinet.
l Slide board boxes with vertical and horizontal rapid shift handle.
l Special indication is required if tailstock sleeve is with a scale.
Item | unit | CW6263C lathe machine tornos |
Max. swing over bed | mm | 630 |
Max. swing over carriage | mm | 350 |
Center distance | mm | 1000 |
Width of gap | mm | 320 |
Swing over gap | mm | 800 |
Width of guide way | mm | 550 |
Spindle bore diameter | mm | 100 |
Spindle speed | rpm | (18 speeds) 7.5~1000 |
Longitudinal feed | mm/r | (64) 0.1~24.3 |
Cross feed | mm/r | (64) 0.05~12.15 |
Rapid traverse speed | m/min | 3.8 |
Metric thread | mm | (39)1~240 |
Inch thread | TPI | (26) 14~1 |
Module thread | mm | (53) 0.5~120 |
Diametrical pitch thread | mm | (24) 28~1 |
Max. travel of cross slide | mm | 445 |
Travel of top slide | mm | 200 |
Main motor power | kW | 11 |
Rapid traverse motor power | kW | 1.1 |
Coolant pump motor power | kW | 0.09 |
