zhuzhou carbide indexable insert TNMG for cnc cutting machine
1)Product Introduction:
Type | Dimension(mm) | |||||
L | I.W | S | d | r | ||
TNMG | 110304-DM | 11 | 6.35 | 3.18 | 2.2 | 0.4 |
110308-DM | 11 | 6.35 | 3.18 | 2.2 | 0.8 | |
160404-DM | 16.5 | 9.525 | 4.76 | 3.18 | 0.4 | |
160408-DM | 16.5 | 9.525 | 4.76 | 3.18 | 0.8 | |
160412-DM | 16.5 | 9.525 | 4.76 | 3.18 | 1.2 | |
220408-DM | 22 | 12.7 | 4.76 | 5.16 | 0.8 | |
220412-DM | 22 | 12.7 | 4.76 | 5.16 | 1.2 | |
220416-DM | 22 | 12.7 | 4.76 | 5.16 | 1.6 | |
Grade for TNMG :
XHC151:Substrate with excellent wear-resistance,in combination with MT-Ti(CN),thick layer AL2 O3, TiN coating.It is an ideal grade for the finishing steel,cast steel and stainless steel under gigh speed and dry machining.
XHC251:Cutting edge with special strength and toughness,in an optimal combination with MT-Ti(CN),thick layer AL2 O3,Tin coating.itis a suitable grades for a wide application.It is good for the finishing.Semi-finishing and Light roughing of steel,cast steel and stainless steel.
XHC351:Substrate with high strength and resistance against plastic deformation,in combination with MT-Ti(CN),thick layer AL2 O3,TiN coating.It is suitable for light roughing and roughing steel,cast steel and stainless steel.
XHM151:Substrate with special structure,in combination with Ti(CN),thin layer AL2 O3,TiN coating .Withthe resistance against diffusion wearness and plastic deformation,it is good for finishing and semi-finishing(turning as well as boring)of stainless steel.
XHM251:Substrate with good toughness and stength,in combination with Ti(CN),thin layer AL2 O3,Tin coating .It is a premium grade for semi-finishing to light roughing (turning and boring) of stainless steel at continuous and intermittent machining conditions.
XHM351: Ti(CN),thin layer AL2 O3,Tin coating with very good strength and impact resistance.It is suitable for roughing turning of stainless steels at low to moderate cutting speed or interrupted cutting,also for high cutting speed and heavy cutting in P30 area.
XHG102: in combination with PVD TiN,TiAIN coated carbide grade.Suitable for finish machining of cast iron.
XHG151:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for semi-finish turning of cast iron.
XHG252:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for rough machining of cast iron.
XHD252:In combination with PVD TiN,TiAIN coated carbide grade.Suitable for rough machining of hard cast iron,nodular cast iron.
Pictures for TNMG:
2) Advantages:
1.Produced with advanced German equipments and perfect workmanship
2.We are good at process.Every pieces would do it,not Batch processing
3. Long use lifetime and stable performance
4.Good quality with competitive price
Our Equipments:
3)Other Main Products:
Aluminum turning inserts
Commonly used models:CCGX ,DCGX ,TCGX ,VCGX ,SCGX ,SEHT,APKT.
Turning inserts
Commonly used models:CNMG ,SNMG ,TNMG ,CCMT ,WCMX ,DNMG ,SNUN ,TNGA ,
TNUN ,WNMG ,DCMT ,RPMT
Cermet inserts
Commonly used models:SEKN ,SPKN ,SPRN ,SEEN ,TNGG ,CNMG ,SNMG ,TNMG ,CCMT ,DNMG ,WNUN ,WNMG
Milling inserts
Commonly used models: SEKN ,SPKN ,RDKW ,RPMW ,TPCN ,TPKN ,TPAN ,APKT APMT, R390
4) Company Brief Introduction:
Zhuzhou XinhuaCemented Carbide IndustryCo.,Ltd is a large manufacturer and exporter for cemented carbide cutting tools(such as:milling inserts,turning inserts and Aluninum inserts and so on)in China.
Our factory set up more than 27years,and there have a abundant of experience to manufacture the cemented carbide inserts.Our produces sell well in Suoth America,EU ,Asian and so on.
“What should I do?I haven’t found the insert type in your Ablibaba”.It doesn’t matter,we can according to your request to manufacture the inserts.
If you have any interest, pls feel free to contact with us,we will reply you in 12hours.Thank you!